Processing Job Log for Sequence 47005030, version 004

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (15:21:5)

Checking input files for validity (15:21:6)

-> Verifying the input files
-> FITS file fa990506_0440.1240 exists
-> FITS file ft990506_0440.1240 exists
-> FITS file ad47005030_input.cat exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.0011923E+08 = 1999-05-06 04:40:26
-> Observation ends 2.0014805E+08 = 1999-05-06 12:40:46

Determine nominal pointing (15:21:10)

-> Checking fa990506_0440.1240 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect

Spacecraft Euler Angles: Phi=-52.09536 Theta=49.17100 Psi=20.48311
Telescope pointing: R.A.=308.15559 Dec=41.04080 Roll=290.31869 degrees

-> Nominal spacecraft Euler angles: Phi=-52.095358356961 Theta=49.170999055957 Psi=20.483111617831
-> Nominal telescope pointing: R.A.=308.15559194272 Dec=41.040804210164 Roll Angle=290.31868826650
-> Galactic Coordinates: Lii=79.933912 Bii=0.720081

Running frfread on telemetry files (15:21:17)

-> Running frfread on ft990506_0440.1240
-> stdout output from frfread4

Dropping SF 114 with synch code word 0 = 255 not 250
Dropping SF 115 with synch code word 1 = 195 not 243
Dropping SF 116 with invalid bit rate 7
Dropped 1st C0 read after clocking change in ft990506_0440_1240S000602L.fits
Dropped 1st C1 read after clocking change in ft990506_0440_1240S000602L.fits
Dropped 1st C2 read after clocking change in ft990506_0440_1240S000602L.fits
Dropped 1st C3 read after clocking change in ft990506_0440_1240S000602L.fits
Dropping SF 999 with synch code word 1 = 195 not 243
Dropping SF 1001 with corrupted frame indicator
Dropping SF 1003 with corrupted frame indicator
Dropping SF 1004 with synch code word 0 = 202 not 250
Dropping SF 1005 with synch code word 2 = 64 not 32
Dropping SF 1007 with synch code word 1 = 147 not 243
Dropping SF 1008 with synch code word 0 = 226 not 250
Dropping SF 1009 with synch code word 1 = 235 not 243
Dropping SF 1010 with synch code word 0 = 251 not 250
Dropping SF 1011 with synch code word 0 = 58 not 250
Dropping SF 1012 with synch code word 0 = 154 not 250
Dropping SF 1013 with invalid bit rate 7
Dropping SF 1014 with synch code word 0 = 251 not 250
Dropping SF 1016 with synch code word 1 = 195 not 243
Dropping SF 1017 with synch code word 1 = 240 not 243
Dropping SF 1021 with synch code word 1 = 51 not 243
Dropped 1st C1 read after clocking change in ft990506_0440_1240S000902L.fits
Dropping SF 1130 with corrupted frame indicator
Dropping SF 1131 with synch code word 1 = 245 not 243
Dropping SF 1132 with inconsistent datamode 0/31
Dropping SF 1133 with corrupted frame indicator
Dropping SF 1134 with synch code word 2 = 16 not 32
Dropping SF 1135 with corrupted frame indicator
Dropping SF 1137 with synch code word 1 = 51 not 243
Dropping SF 1138 with synch code word 1 = 240 not 243
SIS0 coordinate error time=200128316.33848 x=0 y=96 pha=0 grade=0
Warning: GIS3 bit assignment changed between 200128328.46348 and 200128330.46347
GIS3 event at 200128330.47421 0.00195312 seconds behind 200128330.47617
GIS3 event at 200128330.53671 0.000976562 seconds behind 200128330.53769
GIS3 event at 200128330.69687 0.0283203 seconds behind 200128330.72519
GIS3 event at 200128330.78085 0.00585938 seconds behind 200128330.78671
GIS3 event at 200128331.09824 0.000976562 seconds behind 200128331.09921
GIS3 event at 200128331.44492 0.000976562 seconds behind 200128331.44589
GIS3 event at 200128331.50449 0.0283203 seconds behind 200128331.53281
GIS3 event at 200128331.53476 0.00585938 seconds behind 200128331.54062
GIS3 event at 200128331.56894 0.0263672 seconds behind 200128331.59531
GIS3 event at 200128331.63046 0.000976562 seconds behind 200128331.63144
GIS3 event at 200128331.78671 0.00195312 seconds behind 200128331.78867
GIS3 event at 200128331.78476 0.0351562 seconds behind 200128331.81992
GIS3 event at 200128332.22421 0.0322266 seconds behind 200128332.25644
SIS0 coordinate error time=200128320.33847 x=0 y=0 pha=6 grade=0
Warning: GIS3 bit assignment changed between 200128330.46347 and 200128332.46347
GIS2 coordinate error time=200128333.96444 x=0 y=0 pha=384 rise=0
Dropping SF 1269 with synch code word 0 = 58 not 250
GIS2 coordinate error time=200128337.53865 x=48 y=0 pha=0 rise=0
SIS1 coordinate error time=200128324.33845 x=0 y=0 pha=768 grade=0
SIS1 coordinate error time=200128324.33845 x=0 y=6 pha=0 grade=0
Dropping SF 1271 with corrupted frame indicator
Dropping SF 1272 with synch code word 0 = 252 not 250
Dropping SF 1273 with corrupted frame indicator
Dropping SF 1274 with synch code word 0 = 202 not 250
Dropping SF 1275 with synch code word 0 = 202 not 250
Dropping SF 1276 with synch code word 1 = 147 not 243
Dropping SF 1277 with corrupted frame indicator
Dropping SF 1278 with corrupted frame indicator
SIS0 coordinate error time=200128404.33821 x=0 y=0 pha=24 grade=0
Dropping SF 1280 with corrupted frame indicator
Dropping SF 1281 with synch code word 1 = 147 not 243
SIS1 coordinate error time=200128412.33818 x=0 y=12 pha=0 grade=0
607.998 second gap between superframes 1455 and 1456
Dropped 1st C2 read after clocking change in ft990506_0440_1240S101002L.fits
Dropped 1st C3 read after clocking change in ft990506_0440_1240S101002L.fits
Dropped 1st C0 read after clocking change in ft990506_0440_1240S101002L.fits
Dropped 1st C1 read after clocking change in ft990506_0440_1240S101002L.fits
Dropping SF 2566 with corrupted frame indicator
GIS2 coordinate error time=200133339.06606 x=128 y=0 pha=1 rise=0
GIS2 coordinate error time=200133339.9684 x=12 y=0 pha=0 rise=0
Dropping SF 2787 with synch code word 0 = 246 not 250
Dropping SF 2788 with corrupted frame indicator
Dropping SF 2789 with synch code word 2 = 64 not 32
GIS2 coordinate error time=200133346.55432 x=128 y=0 pha=1 rise=0
GIS2 coordinate error time=200133347.45666 x=48 y=0 pha=0 rise=0
Dropping SF 2791 with synch code word 1 = 245 not 243
Dropping SF 2792 with corrupted frame indicator
Dropped 1st C3 read after clocking change in ft990506_0440_1240S101302L.fits
Dropping SF 2889 with synch code word 2 = 64 not 32
GIS2 coordinate error time=200133733.69767 x=12 y=0 pha=0 rise=0
SIS1 coordinate error time=200133720.32169 x=6 y=0 pha=0 grade=0
Dropping SF 2891 with synch code word 1 = 195 not 243
Dropping SF 2892 with synch code word 1 = 147 not 243
GIS2 coordinate error time=200133739.16249 x=0 y=0 pha=3 rise=0
GIS2 coordinate error time=200133739.37343 x=0 y=0 pha=96 rise=0
GIS2 coordinate error time=200133739.96718 x=0 y=0 pha=96 rise=0
SIS0 coordinate error time=200133728.32167 x=192 y=0 pha=0 grade=0
SIS0 coordinate error time=200133728.32167 x=0 y=96 pha=0 grade=0
SIS0 coordinate error time=200133728.32167 x=0 y=0 pha=0 grade=3
SIS0 coordinate error time=200133728.32167 x=0 y=3 pha=0 grade=0
SIS0 coordinate error time=200133728.32167 x=0 y=48 pha=0 grade=0
SIS0 coordinate error time=200133728.32167 x=96 y=0 pha=0 grade=0
SIS0 coordinate error time=200133728.32167 x=0 y=6 pha=0 grade=0
Dropping SF 2894 with synch code word 0 = 249 not 250
Dropping SF 2895 with synch code word 0 = 58 not 250
Dropping SF 2896 with synch code word 0 = 122 not 250
Dropping SF 2897 with synch code word 1 = 240 not 243
Dropping SF 2898 with synch code word 1 = 51 not 243
SIS0 coordinate error time=200133740.32163 x=0 y=0 pha=1 grade=0
SIS0 coordinate error time=200133740.32163 x=0 y=1 pha=1024 grade=0
Dropping SF 3020 with synch code word 2 = 56 not 32
Dropping SF 3021 with corrupted frame indicator
Dropping SF 3022 with synch code word 0 = 249 not 250
Dropping SF 3023 with inconsistent datamode 0/31
Dropping SF 3024 with synch code word 0 = 252 not 250
Dropping SF 3025 with synch code word 0 = 154 not 250
GIS2 coordinate error time=200134020.63819 x=128 y=0 pha=1 rise=0
GIS2 coordinate error time=200134020.71631 x=12 y=0 pha=0 rise=0
SIS1 coordinate error time=200134008.3208 x=384 y=0 pha=0 grade=0
SIS1 coordinate error time=200134008.3208 x=0 y=1 pha=1024 grade=0
SIS1 coordinate error time=200134008.3208 x=0 y=0 pha=768 grade=0
SIS1 coordinate error time=200134008.3208 x=24 y=0 pha=0 grade=0
SIS1 coordinate error time=200134008.3208 x=0 y=0 pha=6 grade=0
SIS1 coordinate error time=200134288.31994 x=0 y=0 pha=1536 grade=0
Dropping SF 3167 with synch code word 0 = 251 not 250
GIS2 coordinate error time=200134306.27794 x=0 y=0 pha=48 rise=0
SIS1 coordinate error time=200134292.31993 x=0 y=0 pha=768 grade=0
SIS1 coordinate error time=200134292.31993 x=48 y=0 pha=0 grade=0
SIS1 coordinate error time=200134292.31993 x=0 y=0 pha=3 grade=0
SIS1 coordinate error time=200134292.31993 x=0 y=384 pha=0 grade=0
SIS1 coordinate error time=200134292.31993 x=6 y=0 pha=0 grade=0
SIS1 coordinate error time=200134292.31993 x=0 y=0 pha=96 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=0 pha=1536 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=48 pha=0 grade=0
SIS0 coordinate error time=200134296.31992 x=384 y=0 pha=0 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=0 pha=1536 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=384 pha=0 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=0 pha=0 grade=3
SIS0 coordinate error time=200134296.31992 x=384 y=0 pha=0 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=1 pha=1024 grade=0
SIS0 coordinate error time=200134296.31992 x=0 y=0 pha=768 grade=0
Dropping SF 3170 with corrupted frame indicator
Dropping SF 3171 with synch code word 0 = 122 not 250
Dropping SF 3172 with synch code word 0 = 226 not 250
Dropping SF 3173 with corrupted frame indicator
Dropping SF 3174 with synch code word 0 = 58 not 250
Dropping SF 3175 with synch code word 2 = 33 not 32
Dropping SF 3176 with synch code word 0 = 251 not 250
Dropping SF 3177 with synch code word 1 = 51 not 243
Dropping SF 3178 with synch code word 1 = 255 not 243
Dropping SF 3179 with synch code word 1 = 195 not 243
GIS2 coordinate error time=200134329.49271 x=192 y=0 pha=0 rise=0
SIS1 coordinate error time=200134316.31986 x=0 y=0 pha=6 grade=0
SIS1 coordinate error time=200134316.31986 x=0 y=0 pha=0 grade=6
SIS1 coordinate error time=200134316.31986 x=0 y=48 pha=0 grade=0
SIS1 coordinate error time=200134316.31986 x=0 y=0 pha=0 grade=3
SIS1 coordinate error time=200134316.31986 x=1 y=256 pha=0 grade=0
SIS1 coordinate error time=200134316.31986 x=384 y=0 pha=0 grade=0
SIS1 coordinate error time=200134316.31986 x=6 y=0 pha=0 grade=0
Dropping SF 3181 with synch code word 0 = 252 not 250
Dropping SF 3182 with synch code word 1 = 147 not 243
Dropping SF 3183 with synch code word 0 = 202 not 250
607.998 second gap between superframes 3407 and 3408
5233 of 5305 super frames processed

-> 1% of superframes in ft990506_0440.1240 corrupted
-> Deleting the following files with NEVENTS=0

ft990506_0440_1240G200870H.fits
ft990506_0440_1240G201470H.fits
ft990506_0440_1240G201570H.fits
ft990506_0440_1240G202870M.fits
ft990506_0440_1240G202970L.fits
ft990506_0440_1240G203070L.fits
ft990506_0440_1240G203570M.fits
ft990506_0440_1240G203670L.fits
ft990506_0440_1240G203770L.fits
ft990506_0440_1240G204270H.fits
ft990506_0440_1240G204370M.fits
ft990506_0440_1240G204470M.fits
ft990506_0440_1240G301670H.fits
ft990506_0440_1240G303170M.fits
ft990506_0440_1240G303270L.fits
ft990506_0440_1240G303370L.fits
ft990506_0440_1240G303870M.fits
ft990506_0440_1240G303970L.fits
ft990506_0440_1240G304070L.fits
ft990506_0440_1240G304570H.fits
ft990506_0440_1240G304670M.fits
ft990506_0440_1240G304770M.fits
ft990506_0440_1240S002002L.fits
ft990506_0440_1240S002601M.fits
ft990506_0440_1240S102002L.fits
ft990506_0440_1240S102601M.fits

-> merging GTIs for s0 990506_0440.1240
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990506_0440_1240S0HK.fits
-> Total ONTIME for s0 990506_0440.1240 = 22887.9
-> merging GTIs for s1 990506_0440.1240
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990506_0440_1240S1HK.fits
-> Total ONTIME for s1 990506_0440.1240 = 22903.9
-> merging GTIs for g2 990506_0440.1240
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990506_0440_1240G2HK.fits
-> Total ONTIME for g2 990506_0440.1240 = 21201.9
-> merging GTIs for g3 990506_0440.1240
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990506_0440_1240G3HK.fits
-> Total ONTIME for g3 990506_0440.1240 = 21209.9

Merging event files from frfread (15:24:21)

-> Grouping s0 event files
-> stdout output from group_event_files

1 ft990506_0440_1240S000402H.fits 215127
1 ft990506_0440_1240S001002H.fits 215127
1 ft990506_0440_1240S001202H.fits 215127
1 ft990506_0440_1240S001402H.fits 215127
1 ft990506_0440_1240S002202H.fits 215127
2 ft990506_0440_1240S000102M.fits 68038
2 ft990506_0440_1240S000302M.fits 68038
2 ft990506_0440_1240S001602M.fits 68038
2 ft990506_0440_1240S001802M.fits 68038
2 ft990506_0440_1240S002402M.fits 68038
3 ft990506_0440_1240S000202L.fits 10198
3 ft990506_0440_1240S001702L.fits 10198
3 ft990506_0440_1240S001902L.fits 10198
3 ft990506_0440_1240S002102L.fits 10198
4 ft990506_0440_1240S000502L.fits 2713
4 ft990506_0440_1240S000902L.fits 2713
4 ft990506_0440_1240S001102L.fits 2713
4 ft990506_0440_1240S001302L.fits 2713
5 ft990506_0440_1240S000702H.fits 2554
6 ft990506_0440_1240S000602L.fits 1044
6 ft990506_0440_1240S000802L.fits 1044
7 ft990506_0440_1240S001502H.fits 454
7 ft990506_0440_1240S002302H.fits 454
8 ft990506_0440_1240S002502M.fits 90

-> Creating ad47005030s000102h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000402H.fits 
 2 -- ft990506_0440_1240S001002H.fits 
 3 -- ft990506_0440_1240S001202H.fits 
 4 -- ft990506_0440_1240S001402H.fits 
 5 -- ft990506_0440_1240S002202H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000402H.fits 
 2 -- ft990506_0440_1240S001002H.fits 
 3 -- ft990506_0440_1240S001202H.fits 
 4 -- ft990506_0440_1240S001402H.fits 
 5 -- ft990506_0440_1240S002202H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s000202m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000102M.fits 
 2 -- ft990506_0440_1240S000302M.fits 
 3 -- ft990506_0440_1240S001602M.fits 
 4 -- ft990506_0440_1240S001802M.fits 
 5 -- ft990506_0440_1240S002402M.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000102M.fits 
 2 -- ft990506_0440_1240S000302M.fits 
 3 -- ft990506_0440_1240S001602M.fits 
 4 -- ft990506_0440_1240S001802M.fits 
 5 -- ft990506_0440_1240S002402M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s000302l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000202L.fits 
 2 -- ft990506_0440_1240S001702L.fits 
 3 -- ft990506_0440_1240S001902L.fits 
 4 -- ft990506_0440_1240S002102L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000202L.fits 
 2 -- ft990506_0440_1240S001702L.fits 
 3 -- ft990506_0440_1240S001902L.fits 
 4 -- ft990506_0440_1240S002102L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s000402l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000502L.fits 
 2 -- ft990506_0440_1240S000902L.fits 
 3 -- ft990506_0440_1240S001102L.fits 
 4 -- ft990506_0440_1240S001302L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000502L.fits 
 2 -- ft990506_0440_1240S000902L.fits 
 3 -- ft990506_0440_1240S001102L.fits 
 4 -- ft990506_0440_1240S001302L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft990506_0440_1240S000702H.fits for validity
-> Creating ad47005030s000502h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000702H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000702H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s000602l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S000602L.fits 
 2 -- ft990506_0440_1240S000802L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S000602L.fits 
 2 -- ft990506_0440_1240S000802L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 454 events ft990506_0440_1240S001502H.fits ft990506_0440_1240S002302H.fits
-> Ignoring the following files containing 90 events ft990506_0440_1240S002502M.fits
-> Grouping s1 event files
-> stdout output from group_event_files

1 ft990506_0440_1240S100402H.fits 180368
1 ft990506_0440_1240S100602H.fits 180368
1 ft990506_0440_1240S100802H.fits 180368
1 ft990506_0440_1240S101402H.fits 180368
1 ft990506_0440_1240S102202H.fits 180368
2 ft990506_0440_1240S100102M.fits 59931
2 ft990506_0440_1240S100302M.fits 59931
2 ft990506_0440_1240S101602M.fits 59931
2 ft990506_0440_1240S101802M.fits 59931
2 ft990506_0440_1240S102402M.fits 59931
3 ft990506_0440_1240S100202L.fits 14772
3 ft990506_0440_1240S101702L.fits 14772
3 ft990506_0440_1240S101902L.fits 14772
3 ft990506_0440_1240S102102L.fits 14772
4 ft990506_0440_1240S100502L.fits 4590
4 ft990506_0440_1240S100702L.fits 4590
4 ft990506_0440_1240S100902L.fits 4590
4 ft990506_0440_1240S101302L.fits 4590
5 ft990506_0440_1240S101102H.fits 1402
6 ft990506_0440_1240S101002L.fits 1094
6 ft990506_0440_1240S101202L.fits 1094
7 ft990506_0440_1240S101502H.fits 397
7 ft990506_0440_1240S102302H.fits 397
8 ft990506_0440_1240S102502M.fits 56

-> Creating ad47005030s100102h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S100402H.fits 
 2 -- ft990506_0440_1240S100602H.fits 
 3 -- ft990506_0440_1240S100802H.fits 
 4 -- ft990506_0440_1240S101402H.fits 
 5 -- ft990506_0440_1240S102202H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S100402H.fits 
 2 -- ft990506_0440_1240S100602H.fits 
 3 -- ft990506_0440_1240S100802H.fits 
 4 -- ft990506_0440_1240S101402H.fits 
 5 -- ft990506_0440_1240S102202H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s100202m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S100102M.fits 
 2 -- ft990506_0440_1240S100302M.fits 
 3 -- ft990506_0440_1240S101602M.fits 
 4 -- ft990506_0440_1240S101802M.fits 
 5 -- ft990506_0440_1240S102402M.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S100102M.fits 
 2 -- ft990506_0440_1240S100302M.fits 
 3 -- ft990506_0440_1240S101602M.fits 
 4 -- ft990506_0440_1240S101802M.fits 
 5 -- ft990506_0440_1240S102402M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s100302l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S100202L.fits 
 2 -- ft990506_0440_1240S101702L.fits 
 3 -- ft990506_0440_1240S101902L.fits 
 4 -- ft990506_0440_1240S102102L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S100202L.fits 
 2 -- ft990506_0440_1240S101702L.fits 
 3 -- ft990506_0440_1240S101902L.fits 
 4 -- ft990506_0440_1240S102102L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s100402l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S100502L.fits 
 2 -- ft990506_0440_1240S100702L.fits 
 3 -- ft990506_0440_1240S100902L.fits 
 4 -- ft990506_0440_1240S101302L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S100502L.fits 
 2 -- ft990506_0440_1240S100702L.fits 
 3 -- ft990506_0440_1240S100902L.fits 
 4 -- ft990506_0440_1240S101302L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft990506_0440_1240S101102H.fits for validity
-> Creating ad47005030s100502h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S101102H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S101102H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030s100602l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240S101002L.fits 
 2 -- ft990506_0440_1240S101202L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240S101002L.fits 
 2 -- ft990506_0440_1240S101202L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 397 events ft990506_0440_1240S101502H.fits ft990506_0440_1240S102302H.fits
-> Ignoring the following files containing 56 events ft990506_0440_1240S102502M.fits
-> Grouping g2 event files
-> stdout output from group_event_files

1 ft990506_0440_1240G200570H.fits 195847
1 ft990506_0440_1240G200770H.fits 195847
1 ft990506_0440_1240G200970H.fits 195847
1 ft990506_0440_1240G201270H.fits 195847
1 ft990506_0440_1240G201770H.fits 195847
1 ft990506_0440_1240G202270H.fits 195847
1 ft990506_0440_1240G202470H.fits 195847
1 ft990506_0440_1240G204070H.fits 195847
2 ft990506_0440_1240G200170M.fits 49939
2 ft990506_0440_1240G200470M.fits 49939
2 ft990506_0440_1240G202670M.fits 49939
2 ft990506_0440_1240G203370M.fits 49939
3 ft990506_0440_1240G200370L.fits 14826
3 ft990506_0440_1240G200670L.fits 14826
3 ft990506_0440_1240G201170L.fits 14826
3 ft990506_0440_1240G201370L.fits 14826
3 ft990506_0440_1240G201870L.fits 14826
3 ft990506_0440_1240G203270L.fits 14826
3 ft990506_0440_1240G203970L.fits 14826
4 ft990506_0440_1240G200270L.fits 688
4 ft990506_0440_1240G201070L.fits 688
5 ft990506_0440_1240G202570M.fits 427
6 ft990506_0440_1240G203170L.fits 166
7 ft990506_0440_1240G203870L.fits 72
8 ft990506_0440_1240G201970H.fits 33
9 ft990506_0440_1240G202770M.fits 31
9 ft990506_0440_1240G203470M.fits 31
10 ft990506_0440_1240G202070H.fits 30
11 ft990506_0440_1240G201670H.fits 28
11 ft990506_0440_1240G202170H.fits 28
12 ft990506_0440_1240G202370H.fits 25
13 ft990506_0440_1240G204170H.fits 25

-> Creating ad47005030g200170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G200570H.fits 
 2 -- ft990506_0440_1240G200770H.fits 
 3 -- ft990506_0440_1240G200970H.fits 
 4 -- ft990506_0440_1240G201270H.fits 
 5 -- ft990506_0440_1240G201770H.fits 
 6 -- ft990506_0440_1240G202270H.fits 
 7 -- ft990506_0440_1240G202470H.fits 
 8 -- ft990506_0440_1240G204070H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G200570H.fits 
 2 -- ft990506_0440_1240G200770H.fits 
 3 -- ft990506_0440_1240G200970H.fits 
 4 -- ft990506_0440_1240G201270H.fits 
 5 -- ft990506_0440_1240G201770H.fits 
 6 -- ft990506_0440_1240G202270H.fits 
 7 -- ft990506_0440_1240G202470H.fits 
 8 -- ft990506_0440_1240G204070H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g200270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G200170M.fits 
 2 -- ft990506_0440_1240G200470M.fits 
 3 -- ft990506_0440_1240G202670M.fits 
 4 -- ft990506_0440_1240G203370M.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G200170M.fits 
 2 -- ft990506_0440_1240G200470M.fits 
 3 -- ft990506_0440_1240G202670M.fits 
 4 -- ft990506_0440_1240G203370M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g200370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G200370L.fits 
 2 -- ft990506_0440_1240G200670L.fits 
 3 -- ft990506_0440_1240G201170L.fits 
 4 -- ft990506_0440_1240G201370L.fits 
 5 -- ft990506_0440_1240G201870L.fits 
 6 -- ft990506_0440_1240G203270L.fits 
 7 -- ft990506_0440_1240G203970L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G200370L.fits 
 2 -- ft990506_0440_1240G200670L.fits 
 3 -- ft990506_0440_1240G201170L.fits 
 4 -- ft990506_0440_1240G201370L.fits 
 5 -- ft990506_0440_1240G201870L.fits 
 6 -- ft990506_0440_1240G203270L.fits 
 7 -- ft990506_0440_1240G203970L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g200470l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G200270L.fits 
 2 -- ft990506_0440_1240G201070L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G200270L.fits 
 2 -- ft990506_0440_1240G201070L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 427 events ft990506_0440_1240G202570M.fits
-> Ignoring the following files containing 166 events ft990506_0440_1240G203170L.fits
-> Ignoring the following files containing 72 events ft990506_0440_1240G203870L.fits
-> Ignoring the following files containing 33 events ft990506_0440_1240G201970H.fits
-> Ignoring the following files containing 31 events ft990506_0440_1240G202770M.fits ft990506_0440_1240G203470M.fits
-> Ignoring the following files containing 30 events ft990506_0440_1240G202070H.fits
-> Ignoring the following files containing 28 events ft990506_0440_1240G201670H.fits ft990506_0440_1240G202170H.fits
-> Ignoring the following files containing 25 events ft990506_0440_1240G202370H.fits
-> Ignoring the following files containing 25 events ft990506_0440_1240G204170H.fits
-> Grouping g3 event files
-> stdout output from group_event_files

1 ft990506_0440_1240G300570H.fits 219656
1 ft990506_0440_1240G300770H.fits 219656
1 ft990506_0440_1240G300870H.fits 219656
1 ft990506_0440_1240G300970H.fits 219656
1 ft990506_0440_1240G301270H.fits 219656
1 ft990506_0440_1240G301470H.fits 219656
1 ft990506_0440_1240G301970H.fits 219656
1 ft990506_0440_1240G302470H.fits 219656
1 ft990506_0440_1240G302770H.fits 219656
1 ft990506_0440_1240G304370H.fits 219656
2 ft990506_0440_1240G300170M.fits 49585
2 ft990506_0440_1240G300470M.fits 49585
2 ft990506_0440_1240G302970M.fits 49585
2 ft990506_0440_1240G303670M.fits 49585
3 ft990506_0440_1240G300370L.fits 14703
3 ft990506_0440_1240G300670L.fits 14703
3 ft990506_0440_1240G301170L.fits 14703
3 ft990506_0440_1240G301570L.fits 14703
3 ft990506_0440_1240G302070L.fits 14703
3 ft990506_0440_1240G303570L.fits 14703
3 ft990506_0440_1240G304270L.fits 14703
4 ft990506_0440_1240G300270L.fits 713
4 ft990506_0440_1240G301070L.fits 713
5 ft990506_0440_1240G302870M.fits 469
6 ft990506_0440_1240G303470L.fits 197
7 ft990506_0440_1240G302570H.fits 81
8 ft990506_0440_1240G301370H.fits 67
9 ft990506_0440_1240G304170L.fits 63
10 ft990506_0440_1240G302270H.fits 43
11 ft990506_0440_1240G301870H.fits 41
11 ft990506_0440_1240G302370H.fits 41
12 ft990506_0440_1240G303070M.fits 38
12 ft990506_0440_1240G303770M.fits 38
13 ft990506_0440_1240G302170H.fits 36
14 ft990506_0440_1240G304470H.fits 35
15 ft990506_0440_1240G302670H.fits 30
16 ft990506_0440_1240G301770H.fits 2

-> Creating ad47005030g300170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  10  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 10 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G300570H.fits 
 2 -- ft990506_0440_1240G300770H.fits 
 3 -- ft990506_0440_1240G300870H.fits 
 4 -- ft990506_0440_1240G300970H.fits 
 5 -- ft990506_0440_1240G301270H.fits 
 6 -- ft990506_0440_1240G301470H.fits 
 7 -- ft990506_0440_1240G301970H.fits 
 8 -- ft990506_0440_1240G302470H.fits 
 9 -- ft990506_0440_1240G302770H.fits 
 10 -- ft990506_0440_1240G304370H.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G300570H.fits 
 2 -- ft990506_0440_1240G300770H.fits 
 3 -- ft990506_0440_1240G300870H.fits 
 4 -- ft990506_0440_1240G300970H.fits 
 5 -- ft990506_0440_1240G301270H.fits 
 6 -- ft990506_0440_1240G301470H.fits 
 7 -- ft990506_0440_1240G301970H.fits 
 8 -- ft990506_0440_1240G302470H.fits 
 9 -- ft990506_0440_1240G302770H.fits 
 10 -- ft990506_0440_1240G304370H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g300270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G300170M.fits 
 2 -- ft990506_0440_1240G300470M.fits 
 3 -- ft990506_0440_1240G302970M.fits 
 4 -- ft990506_0440_1240G303670M.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G300170M.fits 
 2 -- ft990506_0440_1240G300470M.fits 
 3 -- ft990506_0440_1240G302970M.fits 
 4 -- ft990506_0440_1240G303670M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g300370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G300370L.fits 
 2 -- ft990506_0440_1240G300670L.fits 
 3 -- ft990506_0440_1240G301170L.fits 
 4 -- ft990506_0440_1240G301570L.fits 
 5 -- ft990506_0440_1240G302070L.fits 
 6 -- ft990506_0440_1240G303570L.fits 
 7 -- ft990506_0440_1240G304270L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G300370L.fits 
 2 -- ft990506_0440_1240G300670L.fits 
 3 -- ft990506_0440_1240G301170L.fits 
 4 -- ft990506_0440_1240G301570L.fits 
 5 -- ft990506_0440_1240G302070L.fits 
 6 -- ft990506_0440_1240G303570L.fits 
 7 -- ft990506_0440_1240G304270L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad47005030g300470l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990506_0440_1240G300270L.fits 
 2 -- ft990506_0440_1240G301070L.fits 
Merging binary extension #: 2 
 1 -- ft990506_0440_1240G300270L.fits 
 2 -- ft990506_0440_1240G301070L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 469 events ft990506_0440_1240G302870M.fits
-> Ignoring the following files containing 197 events ft990506_0440_1240G303470L.fits
-> Ignoring the following files containing 81 events ft990506_0440_1240G302570H.fits
-> Ignoring the following files containing 67 events ft990506_0440_1240G301370H.fits
-> Ignoring the following files containing 63 events ft990506_0440_1240G304170L.fits
-> Ignoring the following files containing 43 events ft990506_0440_1240G302270H.fits
-> Ignoring the following files containing 41 events ft990506_0440_1240G301870H.fits ft990506_0440_1240G302370H.fits
-> Ignoring the following files containing 38 events ft990506_0440_1240G303070M.fits ft990506_0440_1240G303770M.fits
-> Ignoring the following files containing 36 events ft990506_0440_1240G302170H.fits
-> Ignoring the following files containing 35 events ft990506_0440_1240G304470H.fits
-> Ignoring the following files containing 30 events ft990506_0440_1240G302670H.fits
-> Ignoring the following files containing 2 events ft990506_0440_1240G301770H.fits
-> stdout output from tar

a ft990506_0440_1240G201670H.fits 31K
a ft990506_0440_1240G201970H.fits 31K
a ft990506_0440_1240G202070H.fits 31K
a ft990506_0440_1240G202170H.fits 31K
a ft990506_0440_1240G202370H.fits 31K
a ft990506_0440_1240G202570M.fits 43K
a ft990506_0440_1240G202770M.fits 31K
a ft990506_0440_1240G203170L.fits 34K
a ft990506_0440_1240G203470M.fits 31K
a ft990506_0440_1240G203870L.fits 31K
a ft990506_0440_1240G204170H.fits 31K
a ft990506_0440_1240G301370H.fits 31K
a ft990506_0440_1240G301770H.fits 31K
a ft990506_0440_1240G301870H.fits 31K
a ft990506_0440_1240G302170H.fits 31K
a ft990506_0440_1240G302270H.fits 31K
a ft990506_0440_1240G302370H.fits 31K
a ft990506_0440_1240G302570H.fits 31K
a ft990506_0440_1240G302670H.fits 31K
a ft990506_0440_1240G302870M.fits 43K
a ft990506_0440_1240G303070M.fits 31K
a ft990506_0440_1240G303470L.fits 37K
a ft990506_0440_1240G303770M.fits 31K
a ft990506_0440_1240G304170L.fits 31K
a ft990506_0440_1240G304470H.fits 31K
a ft990506_0440_1240S001502H.fits 31K
a ft990506_0440_1240S002302H.fits 34K
a ft990506_0440_1240S002502M.fits 29K
a ft990506_0440_1240S101502H.fits 31K
a ft990506_0440_1240S102302H.fits 34K
a ft990506_0440_1240S102502M.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (15:26:26)

-> No FAINT mode data to convert to bright mode

Calibrating the unfiltered event files (15:26:27)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft990506_0440_1240.ghf
-> stdout output from temp2gain

temp2gain V4.6
leapsec FITS data was successfully read

'ft990506_0440.1240' is successfully opened
Data Start Time is 200119228.49 (19990506 044024)
Time Margin 2.0 sec included
Sync error detected in 113 th SF
Sync error detected in 996 th SF
Sync error detected in 999 th SF
Sync error detected in 1000 th SF
Sync error detected in 1002 th SF
Sync error detected in 1003 th SF
Sync error detected in 1005 th SF
Sync error detected in 1009 th SF
Sync error detected in 1119 th SF
Sync error detected in 1120 th SF
Sync error detected in 1250 th SF
Sync error detected in 1252 th SF
Sync error detected in 1253 th SF
Sync error detected in 1255 th SF
Sync error detected in 2760 th SF
Sync error detected in 2761 th SF
Sync error detected in 2763 th SF
Sync error detected in 2860 th SF
Sync error detected in 2862 th SF
Sync error detected in 2863 th SF
Sync error detected in 2865 th SF
Sync error detected in 2866 th SF
Sync error detected in 2867 th SF
Sync error detected in 2868 th SF
Sync error detected in 2869 th SF
Sync error detected in 2991 th SF
Sync error detected in 2992 th SF
Sync error detected in 2993 th SF
Sync error detected in 3135 th SF
Sync error detected in 3138 th SF
Sync error detected in 3139 th SF
Sync error detected in 3140 th SF
Sync error detected in 3141 th SF
Sync error detected in 3142 th SF
Sync error detected in 3143 th SF
Sync error detected in 3144 th SF
Sync error detected in 3145 th SF
'ft990506_0440.1240' EOF detected, sf=5305
Data End Time is 200148048.40 (19990506 124044)
Gain History is written in ft990506_0440_1240.ghf

-> Generating attitude correction table ad47005030_004_bp4.txt
-> Extracting info from ft990506_0440_1240CMHK.fits
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad47005030g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad47005030g200170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad47005030g200270m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g200270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030g200370l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g200370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030g200470l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g200470l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad47005030g300170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad47005030g300270m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g300270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030g300370l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g300370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030g300470l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47005030g300470l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s000102h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad47005030s000102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s000202m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s000202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s000302l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s000302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s000402l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s000402l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

-> Preparing to run ascalin on ad47005030s000502h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s000502h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

-> Preparing to run ascalin on ad47005030s000602l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s000602l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

-> Preparing to run ascalin on ad47005030s100102h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s100202m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s100302l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    200122709.48079
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad47005030s100402l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100402l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

-> Preparing to run ascalin on ad47005030s100502h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100502h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

-> Preparing to run ascalin on ad47005030s100602l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47005030s100602l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

Creating filter files (15:30:25)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.252 to working directory
-> Creating ft990506_0440_1240.mkf
-> stdout output from mkfilter2

 
leapsec FITS data was successfully read

S0-HK file: ft990506_0440_1240S0HK.fits

S1-HK file: ft990506_0440_1240S1HK.fits

G2-HK file: ft990506_0440_1240G2HK.fits

G3-HK file: ft990506_0440_1240G3HK.fits

Date and time are: 1999-05-06 04:39:26  mjd=51304.194057

Orbit file name is frf.orbit.252

Epoch of Orbital Elements: 1999-05-01 23:00:00

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa990506_0440.1240

output FITS File: ft990506_0440_1240.mkf

mkfilter2: Warning, faQparam error: time= 2.001191824916e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 903 Data bins were processed.

-> Adding deadtime to ft990506_0440_1240.mkf
-> Plotting quantities from ft990506_0440_1240.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (15:36:14)

-> Filtering ad47005030s000102h.unf into ad47005030s000102h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14082.499
 The mean of the selected column is                  67.704321
 The standard deviation of the selected column is    16.569874
 The minimum of selected column is                   23.400072
 The maximum of selected column is                   118.43787
 The number of points used in calculation is              208

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>17.9 && S0_PIXL1<117.4 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.81E+04   215127 0100
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         183983    155505              0     28478         0         0
 Writing events file
 155505 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        183983    155505              0     28478         0         0
   in  6663.1     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       155505
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        4689
 Flickering pixels iter, pixels & cnts :   1          22         578
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           25
 Number of (internal) image counts   :       155505
 Number of image cts rejected (N, %) :         5267 3.39
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           25            0            0
 
 Image counts      :             0       155505            0            0
 Image cts rejected:             0         5267            0            0
 Image cts rej (%) :          0.00         3.39         0.00         0.00
 
    filtering data...
 
 Total counts      :             0       155505            0            0
 Total cts rejected:             0         5267            0            0
 Total cts rej (%) :          0.00         3.39         0.00         0.00
 
 Number of clean counts accepted  :       150238
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           25
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47005030s000102h.evt use_events=no
Wrote cleaned events file to ad47005030s000102h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad47005030s000202m.unf into ad47005030s000202m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3116.0290
 The mean of the selected column is                  50.258532
 The standard deviation of the selected column is    13.218321
 The minimum of selected column is                   2.9879706
 The maximum of selected column is                   81.781517
 The number of points used in calculation is               62

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>10.6 && S0_PIXL1<89.9 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.45E+04    68038 0100
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          59006     28299              0     30707         0         0
 Writing events file
  28299 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         59006     28299              0     30707         0         0
   in  1944.4     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        28299
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        1382
 Flickering pixels iter, pixels & cnts :   1          19         194
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           22
 Number of (internal) image counts   :        28299
 Number of image cts rejected (N, %) :         1576 5.57
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           22            0            0
 
 Image counts      :             0        28299            0            0
 Image cts rejected:             0         1576            0            0
 Image cts rej (%) :          0.00         5.57         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        28299            0            0
 Total cts rejected:             0         1576            0            0
 Total cts rej (%) :          0.00         5.57         0.00         0.00
 
 Number of clean counts accepted  :        26723
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           22
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47005030s000202m.evt use_events=no
Wrote cleaned events file to ad47005030s000202m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad47005030s000302l.unf into ad47005030s000302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  04:50:58    0.71E+04    10198 0100
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47005030s000302l.evt use_events=no
Wrote cleaned events file to ad47005030s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad47005030s000302l.evt since it contains 0 events
-> Filtering ad47005030s000402l.unf into ad47005030s000402l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:25:54    0.30E+04     2713 0100
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000402l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47005030s000402l.evt use_events=no
Wrote cleaned events file to ad47005030s000402l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad47005030s000402l.evt since it contains 0 events
-> Filtering ad47005030s000502h.unf into ad47005030s000502h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)&&(S0_PIXL2>0)&&(S0_PIXL3>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  07:00:48    0.12E+02     2554 1111
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000502h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000502h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT > Session saved, goodbye

-> Filtering ad47005030s000602l.unf into ad47005030s000602l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)&&(S0_PIXL2>0)&&(S0_PIXL3>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:47:36    0.14E+03     1044 1111
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000602l.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s000602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT > Session saved, goodbye

-> Filtering ad47005030s100102h.unf into ad47005030s100102h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14487.272
 The mean of the selected column is                  69.650345
 The standard deviation of the selected column is    18.581577
 The minimum of selected column is                   24.166740
 The maximum of selected column is                   144.37546
 The number of points used in calculation is              208

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>13.9 && S1_PIXL3<125.3 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.81E+04   180368 0001
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         156510    131553              0     24957         0         0
 Writing events file
 131553 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        156510    131553              0     24957         0         0
   in  6671.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       131553
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               6        8954
 Flickering pixels iter, pixels & cnts :   1          19         815
 
 Number of pixels rejected           :           25
 Number of (internal) image counts   :       131553
 Number of image cts rejected (N, %) :         9769 7.43
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           25
 
 Image counts      :             0            0            0       131553
 Image cts rejected:             0            0            0         9769
 Image cts rej (%) :          0.00         0.00         0.00         7.43
 
    filtering data...
 
 Total counts      :             0            0            0       131553
 Total cts rejected:             0            0            0         9769
 Total cts rej (%) :          0.00         0.00         0.00         7.43
 
 Number of clean counts accepted  :       121784
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           25
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47005030s100102h.evt use_events=no
Wrote cleaned events file to ad47005030s100102h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad47005030s100202m.unf into ad47005030s100202m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3588.0907
 The mean of the selected column is                  57.872431
 The standard deviation of the selected column is    25.786259
 The minimum of selected column is                   3.0482118
 The maximum of selected column is                   211.15694
 The number of points used in calculation is               62

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<135.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.45E+04    59931 0001
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          52079     24773              0     27306         0         0
 Writing events file
  24773 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         52079     24773              0     27306         0         0
   in  1940.6     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        24773
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               7        2341
 Flickering pixels iter, pixels & cnts :   1           9          96
 
 Number of pixels rejected           :           16
 Number of (internal) image counts   :        24773
 Number of image cts rejected (N, %) :         2437 9.84
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           16
 
 Image counts      :             0            0            0        24773
 Image cts rejected:             0            0            0         2437
 Image cts rej (%) :          0.00         0.00         0.00         9.84
 
    filtering data...
 
 Total counts      :             0            0            0        24773
 Total cts rejected:             0            0            0         2437
 Total cts rej (%) :          0.00         0.00         0.00         9.84
 
 Number of clean counts accepted  :        22336
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           16
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47005030s100202m.evt use_events=no
Wrote cleaned events file to ad47005030s100202m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad47005030s100302l.unf into ad47005030s100302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  04:50:58    0.71E+04    14772 0001
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47005030s100302l.evt use_events=no
Wrote cleaned events file to ad47005030s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad47005030s100302l.evt since it contains 0 events
-> Filtering ad47005030s100402l.unf into ad47005030s100402l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:25:54    0.30E+04     4590 0001
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100402l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data14/seq_proc/ad0_47005030.004/screen_in_event.xs
    reading data file: /data/data14/seq_proc/ad0_47005030.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47005030s100402l.evt use_events=no
Wrote cleaned events file to ad47005030s100402l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad47005030s100402l.evt since it contains 0 events
-> Filtering ad47005030s100502h.unf into ad47005030s100502h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL1>0)&&(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  08:35:40    0.16E+02     1402 1111
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100502h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100502h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT > Session saved, goodbye

-> Filtering ad47005030s100602l.unf into ad47005030s100602l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL1>0)&&(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  08:22:44    0.15E+03     1094 1111
Processing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100602l.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030s100602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT > Session saved, goodbye

-> Filtering ad47005030g200170h.unf into ad47005030g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         195847    163753           7558     24536         0         0
 Writing events file
 163753 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        195847    163753           7558     24536         0         0
   in  7022.1     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      163753              160656              3097
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47005030g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad47005030g200270m.unf into ad47005030g200270m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49939     18596           2069     29274         0         0
 Writing events file
  18596 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         49939     18596           2069     29274         0         0
   in  1231.9     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       18596               18226               370
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47005030g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad47005030g200370l.unf into ad47005030g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14826     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14826       495           5356      8975         0         0
 Writing events file
    495 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14826       495           5356      8975         0         0
   in  127.87     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         495                 490                 5
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47005030g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad47005030g200470l.unf into ad47005030g200470l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      688     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47005030g200470l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad47005030g200470l.evt since it contains 0 events
-> Filtering ad47005030g300170h.unf into ad47005030g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         219656    185772           5848     28036         0         0
 Writing events file
 185772 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        219656    185772           5848     28036         0         0
   in  7018.1     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      185772              182470              3302
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47005030g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad47005030g300270m.unf into ad47005030g300270m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49585     19262           1437     28886         0         0
 Writing events file
  19262 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         49585     19262           1437     28886         0         0
   in  1231.9     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       19262               18916               346
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47005030g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad47005030g300370l.unf into ad47005030g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14703     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14703       502           4437      9764         0         0
 Writing events file
    502 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14703       502           4437      9764         0         0
   in  127.87     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         502                 493                 9
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47005030g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad47005030g300470l.unf into ad47005030g300470l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      713     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA > read events ad47005030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47005030g300470l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad47005030g300470l.evt since it contains 0 events

Generating images and exposure maps (15:47:49)

-> Generating exposure map ad47005030g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g200170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3197
 Mean   RA/DEC/ROLL :      308.1580      41.0130     290.3197
 Pnt    RA/DEC/ROLL :      308.1577      41.0666     290.3197
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :            15
 Total GTI (secs)   :      7022.101
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1119.98      1119.98
  20 Percent Complete: Total/live time:       1505.01      1505.01
  30 Percent Complete: Total/live time:       3412.07      3412.07
  40 Percent Complete: Total/live time:       3412.07      3412.07
  50 Percent Complete: Total/live time:       4256.11      4256.11
  60 Percent Complete: Total/live time:       4710.61      4710.61
  70 Percent Complete: Total/live time:       5646.19      5646.19
  80 Percent Complete: Total/live time:       6232.60      6232.60
  90 Percent Complete: Total/live time:       7022.10      7022.10
 100 Percent Complete: Total/live time:       7022.10      7022.10
 
 Number of attitude steps  used:           22
 Number of attitude steps avail:        15242
 Mean RA/DEC pixel offset:      -12.6861      -4.0422
 
    writing expo file: ad47005030g200170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g200170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656    160406            250         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160656    160406            250         0         0         0
   in  7022.1     seconds
 Image            has   160406 counts for  22.84     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656     14840            250         0         0    145566
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160656     14840            250         0         0    145566
   in  7022.1     seconds
 Image            has    14840 counts for  2.113     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656    145855            250         0         0     14551
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160656    145855            250         0         0     14551
   in  7022.1     seconds
 Image            has   145855 counts for  20.77     counts/sec
 Command not found; type ? for a command listing
!ad47005030g200170h:ASCA >
!ad47005030g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g200170h:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200170h:ASCA > read events ad47005030g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200170h:ASCA-GIS2-PH > set image sky
!ad47005030g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad47005030g200170h:ASCA-GIS2-PH > extract image
!ad47005030g200170h:ASCA-GIS2-PH > save image outfile=ad47005030g200170_all.img
Wrote image to file ad47005030g200170_all.img
!ad47005030g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad47005030g200170h:ASCA-GIS2-PH > extract image
!ad47005030g200170h:ASCA-GIS2-PH > save image outfile=ad47005030g200170_lo.img
Wrote image to file ad47005030g200170_lo.img
!ad47005030g200170h:ASCA-GIS2-PH > clear pha_cut
!ad47005030g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g200170h:ASCA-GIS2-PH > extract image
!ad47005030g200170h:ASCA-GIS2-PH > save image outfile=ad47005030g200170_hi.img
Wrote image to file ad47005030g200170_hi.img
!ad47005030g200170h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad47005030g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g200270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3187
 Mean   RA/DEC/ROLL :      308.1802      41.0539     290.3187
 Pnt    RA/DEC/ROLL :      308.0586      40.8922     290.3187
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :             4
 Total GTI (secs)   :      1231.930
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        174.99       174.99
  20 Percent Complete: Total/live time:        288.00       288.00
  30 Percent Complete: Total/live time:        698.93       698.93
  40 Percent Complete: Total/live time:        698.93       698.93
  50 Percent Complete: Total/live time:       1231.93      1231.93
 100 Percent Complete: Total/live time:       1231.93      1231.93
 
 Number of attitude steps  used:           14
 Number of attitude steps avail:          611
 Mean RA/DEC pixel offset:      -11.1837      -2.9498
 
    writing expo file: ad47005030g200270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g200270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g200270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226     18202             24         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18226     18202             24         0         0         0
   in  1231.9     seconds
 Image            has    18202 counts for  14.78     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226      1659             24         0         0     16543
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18226      1659             24         0         0     16543
   in  1231.9     seconds
 Image            has     1659 counts for  1.347     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226     16580             24         0         0      1622
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18226     16580             24         0         0      1622
   in  1231.9     seconds
 Image            has    16580 counts for  13.46     counts/sec
 Command not found; type ? for a command listing
!ad47005030g200270m:ASCA >
!ad47005030g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g200270m:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200270m:ASCA > read events ad47005030g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200270m:ASCA-GIS2-PH > set image sky
!ad47005030g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad47005030g200270m:ASCA-GIS2-PH > extract image
!ad47005030g200270m:ASCA-GIS2-PH > save image outfile=ad47005030g200270_all.img
Wrote image to file ad47005030g200270_all.img
!ad47005030g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad47005030g200270m:ASCA-GIS2-PH > extract image
!ad47005030g200270m:ASCA-GIS2-PH > save image outfile=ad47005030g200270_lo.img
Wrote image to file ad47005030g200270_lo.img
!ad47005030g200270m:ASCA-GIS2-PH > clear pha_cut
!ad47005030g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g200270m:ASCA-GIS2-PH > extract image
!ad47005030g200270m:ASCA-GIS2-PH > save image outfile=ad47005030g200270_hi.img
Wrote image to file ad47005030g200270_hi.img
!ad47005030g200270m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad47005030g200370.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g200370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g200370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3193
 Mean   RA/DEC/ROLL :      308.1802      41.0547     290.3193
 Pnt    RA/DEC/ROLL :      308.0587      40.8888     290.3193
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :             4
 Total GTI (secs)   :       127.869
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         31.99        31.99
  20 Percent Complete: Total/live time:         31.99        31.99
  30 Percent Complete: Total/live time:         63.95        63.95
  40 Percent Complete: Total/live time:         63.95        63.95
  50 Percent Complete: Total/live time:         74.87        74.87
  60 Percent Complete: Total/live time:        127.87       127.87
 100 Percent Complete: Total/live time:        127.87       127.87
 
 Number of attitude steps  used:            5
 Number of attitude steps avail:          549
 Mean RA/DEC pixel offset:      -10.4534      -2.9467
 
    writing expo file: ad47005030g200370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g200370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      490     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490       490              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           490       490              0         0         0         0
   in  127.87     seconds
 Image            has      490 counts for  3.832     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490        53              0         0         0       437
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           490        53              0         0         0       437
   in  127.87     seconds
 Image            has       53 counts for 0.4145     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490       438              0         0         0        52
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           490       438              0         0         0        52
   in  127.87     seconds
 Image            has      438 counts for  3.425     counts/sec
 Command not found; type ? for a command listing
!ad47005030g200370l:ASCA >
!ad47005030g200370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g200370l:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200370l:ASCA > read events ad47005030g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g200370l:ASCA-GIS2-PH > set image sky
!ad47005030g200370l:ASCA-GIS2-PH > filter region corner_point.reg
!ad47005030g200370l:ASCA-GIS2-PH > extract image
!ad47005030g200370l:ASCA-GIS2-PH > save image outfile=ad47005030g200370_all.img
Wrote image to file ad47005030g200370_all.img
!ad47005030g200370l:ASCA-GIS2-PH > filter pha_cut 0 170
!ad47005030g200370l:ASCA-GIS2-PH > extract image
!ad47005030g200370l:ASCA-GIS2-PH > save image outfile=ad47005030g200370_lo.img
Wrote image to file ad47005030g200370_lo.img
!ad47005030g200370l:ASCA-GIS2-PH > clear pha_cut
!ad47005030g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g200370l:ASCA-GIS2-PH > extract image
!ad47005030g200370l:ASCA-GIS2-PH > save image outfile=ad47005030g200370_hi.img
Wrote image to file ad47005030g200370_hi.img
!ad47005030g200370l:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad47005030g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g300170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3143
 Mean   RA/DEC/ROLL :      308.1497      41.0370     290.3143
 Pnt    RA/DEC/ROLL :      308.1660      41.0425     290.3143
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :            15
 Total GTI (secs)   :      7018.101
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1119.98      1119.98
  20 Percent Complete: Total/live time:       1505.01      1505.01
  30 Percent Complete: Total/live time:       3412.07      3412.07
  40 Percent Complete: Total/live time:       3412.07      3412.07
  50 Percent Complete: Total/live time:       4252.11      4252.11
  60 Percent Complete: Total/live time:       4706.61      4706.61
  70 Percent Complete: Total/live time:       5642.19      5642.19
  80 Percent Complete: Total/live time:       6228.60      6228.60
  90 Percent Complete: Total/live time:       7018.10      7018.10
 100 Percent Complete: Total/live time:       7018.10      7018.10
 
 Number of attitude steps  used:           22
 Number of attitude steps avail:        15242
 Mean RA/DEC pixel offset:       -1.1565      -2.8969
 
    writing expo file: ad47005030g300170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g300170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470    182254            216         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182470    182254            216         0         0         0
   in  7018.1     seconds
 Image            has   182254 counts for  25.97     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470     16061            216         0         0    166193
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182470     16061            216         0         0    166193
   in  7018.1     seconds
 Image            has    16061 counts for  2.289     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470    166534            216         0         0     15720
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182470    166534            216         0         0     15720
   in  7018.1     seconds
 Image            has   166534 counts for  23.73     counts/sec
 Command not found; type ? for a command listing
!ad47005030g300170h:ASCA >
!ad47005030g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g300170h:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300170h:ASCA > read events ad47005030g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300170h:ASCA-GIS3-PH > set image sky
!ad47005030g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad47005030g300170h:ASCA-GIS3-PH > extract image
!ad47005030g300170h:ASCA-GIS3-PH > save image outfile=ad47005030g300170_all.img
Wrote image to file ad47005030g300170_all.img
!ad47005030g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47005030g300170h:ASCA-GIS3-PH > extract image
!ad47005030g300170h:ASCA-GIS3-PH > save image outfile=ad47005030g300170_lo.img
Wrote image to file ad47005030g300170_lo.img
!ad47005030g300170h:ASCA-GIS3-PH > clear pha_cut
!ad47005030g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g300170h:ASCA-GIS3-PH > extract image
!ad47005030g300170h:ASCA-GIS3-PH > save image outfile=ad47005030g300170_hi.img
Wrote image to file ad47005030g300170_hi.img
!ad47005030g300170h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad47005030g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g300270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3133
 Mean   RA/DEC/ROLL :      308.1700      41.0743     290.3133
 Pnt    RA/DEC/ROLL :      308.0669      40.8681     290.3133
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :             4
 Total GTI (secs)   :      1231.930
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        174.99       174.99
  20 Percent Complete: Total/live time:        288.00       288.00
  30 Percent Complete: Total/live time:        698.93       698.93
  40 Percent Complete: Total/live time:        698.93       698.93
  50 Percent Complete: Total/live time:       1231.93      1231.93
 100 Percent Complete: Total/live time:       1231.93      1231.93
 
 Number of attitude steps  used:           14
 Number of attitude steps avail:          611
 Mean RA/DEC pixel offset:        0.0321      -1.8356
 
    writing expo file: ad47005030g300270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g300270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g300270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916     18889             27         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18916     18889             27         0         0         0
   in  1231.9     seconds
 Image            has    18889 counts for  15.33     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916      1600             27         0         0     17289
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18916      1600             27         0         0     17289
   in  1231.9     seconds
 Image            has     1600 counts for  1.299     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916     17314             27         0         0      1575
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18916     17314             27         0         0      1575
   in  1231.9     seconds
 Image            has    17314 counts for  14.05     counts/sec
 Command not found; type ? for a command listing
!ad47005030g300270m:ASCA >
!ad47005030g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g300270m:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300270m:ASCA > read events ad47005030g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300270m:ASCA-GIS3-PH > set image sky
!ad47005030g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad47005030g300270m:ASCA-GIS3-PH > extract image
!ad47005030g300270m:ASCA-GIS3-PH > save image outfile=ad47005030g300270_all.img
Wrote image to file ad47005030g300270_all.img
!ad47005030g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47005030g300270m:ASCA-GIS3-PH > extract image
!ad47005030g300270m:ASCA-GIS3-PH > save image outfile=ad47005030g300270_lo.img
Wrote image to file ad47005030g300270_lo.img
!ad47005030g300270m:ASCA-GIS3-PH > clear pha_cut
!ad47005030g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g300270m:ASCA-GIS3-PH > extract image
!ad47005030g300270m:ASCA-GIS3-PH > save image outfile=ad47005030g300270_hi.img
Wrote image to file ad47005030g300270_hi.img
!ad47005030g300270m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad47005030g300370.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47005030g300370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030g300370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3138
 Mean   RA/DEC/ROLL :      308.1716      41.0783     290.3138
 Pnt    RA/DEC/ROLL :      308.0670      40.8648     290.3138
 
 Image rebin factor :             1
 Attitude Records   :         20883
 GTI intervals      :             4
 Total GTI (secs)   :       127.869
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         31.99        31.99
  20 Percent Complete: Total/live time:         31.99        31.99
  30 Percent Complete: Total/live time:         63.95        63.95
  40 Percent Complete: Total/live time:         63.95        63.95
  50 Percent Complete: Total/live time:         74.87        74.87
  60 Percent Complete: Total/live time:        127.87       127.87
 100 Percent Complete: Total/live time:        127.87       127.87
 
 Number of attitude steps  used:            5
 Number of attitude steps avail:          549
 Mean RA/DEC pixel offset:       -0.7905      -1.9868
 
    writing expo file: ad47005030g300370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030g300370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      493     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493       492              1         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           493       492              1         0         0         0
   in  127.87     seconds
 Image            has      492 counts for  3.848     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493        56              1         0         0       436
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           493        56              1         0         0       436
   in  127.87     seconds
 Image            has       56 counts for 0.4379     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493       437              1         0         0        55
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           493       437              1         0         0        55
   in  127.87     seconds
 Image            has      437 counts for  3.418     counts/sec
 Command not found; type ? for a command listing
!ad47005030g300370l:ASCA >
!ad47005030g300370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030g300370l:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300370l:ASCA > read events ad47005030g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030g300370l:ASCA-GIS3-PH > set image sky
!ad47005030g300370l:ASCA-GIS3-PH > filter region corner_point.reg
!ad47005030g300370l:ASCA-GIS3-PH > extract image
!ad47005030g300370l:ASCA-GIS3-PH > save image outfile=ad47005030g300370_all.img
Wrote image to file ad47005030g300370_all.img
!ad47005030g300370l:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47005030g300370l:ASCA-GIS3-PH > extract image
!ad47005030g300370l:ASCA-GIS3-PH > save image outfile=ad47005030g300370_lo.img
Wrote image to file ad47005030g300370_lo.img
!ad47005030g300370l:ASCA-GIS3-PH > clear pha_cut
!ad47005030g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47005030g300370l:ASCA-GIS3-PH > extract image
!ad47005030g300370l:ASCA-GIS3-PH > save image outfile=ad47005030g300370_hi.img
Wrote image to file ad47005030g300370_hi.img
!ad47005030g300370l:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad47005030s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47005030s000102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT          IN          IN          IN
 AREA DISC H START:            6         209           6         316
 AREA DISC H  STOP:          425         292         200         425
 AREA DISC V START:            2         208           2           2
 AREA DISC V  STOP:          422         284         150         112
  
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3044
 Mean   RA/DEC/ROLL :      308.1348      41.0198     290.3044
 Pnt    RA/DEC/ROLL :      308.1797      41.0597     290.3044
 
 Image rebin factor :             4
 Attitude Records   :         20883
 Hot Pixels         :            25
 GTI intervals      :            14
 Total GTI (secs)   :      6663.116
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        896.00       896.00
  20 Percent Complete: Total/live time:       1797.32      1797.32
  30 Percent Complete: Total/live time:       2991.85      2991.85
  40 Percent Complete: Total/live time:       2991.85      2991.85
  50 Percent Complete: Total/live time:       3671.51      3671.51
  60 Percent Complete: Total/live time:       4127.95      4127.95
  70 Percent Complete: Total/live time:       5018.75      5018.75
  80 Percent Complete: Total/live time:       5867.74      5867.74
  90 Percent Complete: Total/live time:       6663.12      6663.12
 100 Percent Complete: Total/live time:       6663.12      6663.12
 
 Number of attitude steps  used:           17
 Number of attitude steps avail:        15197
 Mean RA/DEC pixel offset:      -61.4034     -93.6824
 
    writing expo file: ad47005030s000102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030s000102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030s000102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   150238 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238    150238              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150238    150238              0         0         0         0
   in  6663.1     seconds
 Image            has   150238 counts for  22.55     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238     11978              0         0         0    138260
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150238     11978              0         0         0    138260
   in  6663.1     seconds
 Image            has    11978 counts for  1.798     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238    138355              0         0         0     11883
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150238    138355              0         0         0     11883
   in  6663.1     seconds
 Image            has   138355 counts for  20.76     counts/sec
 Command not found; type ? for a command listing
!ad47005030s000102h:ASCA >
!ad47005030s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030s000102h:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s000102h:ASCA > read events ad47005030s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad47005030s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad47005030s000102h:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000102_all.img
Wrote image to file ad47005030s000102_all.img
!ad47005030s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad47005030s000102h:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000102_lo.img
Wrote image to file ad47005030s000102_lo.img
!ad47005030s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad47005030s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47005030s000102h:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000102_hi.img
Wrote image to file ad47005030s000102_hi.img
!ad47005030s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad47005030s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47005030s000202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL          ON
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT          IN          IN          IN
 AREA DISC H START:            6         209           6         316
 AREA DISC H  STOP:          425         292         200         425
 AREA DISC V START:            2         208           2           2
 AREA DISC V  STOP:          422         284         150         112
  
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3036
 Mean   RA/DEC/ROLL :      308.1390      41.0278     290.3036
 Pnt    RA/DEC/ROLL :      308.0818      40.8854     290.3036
 
 Image rebin factor :             4
 Attitude Records   :         20883
 Hot Pixels         :            22
 GTI intervals      :             5
 Total GTI (secs)   :      1944.390
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        222.99       222.99
  20 Percent Complete: Total/live time:        572.18       572.18
  30 Percent Complete: Total/live time:       1084.18      1084.18
  40 Percent Complete: Total/live time:       1084.18      1084.18
  50 Percent Complete: Total/live time:       1788.18      1788.18
  60 Percent Complete: Total/live time:       1788.18      1788.18
  70 Percent Complete: Total/live time:       1788.30      1788.30
  80 Percent Complete: Total/live time:       1788.30      1788.30
  90 Percent Complete: Total/live time:       1944.39      1944.39
 100 Percent Complete: Total/live time:       1944.39      1944.39
 
 Number of attitude steps  used:           16
 Number of attitude steps avail:          938
 Mean RA/DEC pixel offset:      -51.3452     -86.1392
 
    writing expo file: ad47005030s000202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030s000202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    26723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723     26723              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26723     26723              0         0         0         0
   in  1944.4     seconds
 Image            has    26723 counts for  13.74     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723      2316              0         0         0     24407
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26723      2316              0         0         0     24407
   in  1944.4     seconds
 Image            has     2316 counts for  1.191     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723     24417              0         0         0      2306
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26723     24417              0         0         0      2306
   in  1944.4     seconds
 Image            has    24417 counts for  12.56     counts/sec
 Command not found; type ? for a command listing
!ad47005030s000202m:ASCA >
!ad47005030s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030s000202m:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s000202m:ASCA > read events ad47005030s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad47005030s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad47005030s000202m:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000202_all.img
Wrote image to file ad47005030s000202_all.img
!ad47005030s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad47005030s000202m:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000202_lo.img
Wrote image to file ad47005030s000202_lo.img
!ad47005030s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad47005030s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47005030s000202m:ASCA-SIS0-BRIGHT > extract image
!ad47005030s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad47005030s000202_hi.img
Wrote image to file ad47005030s000202_hi.img
!ad47005030s000202m:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad47005030s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47005030s100102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT          IN
 AREA DISC H START:            6           6           6         254
 AREA DISC H  STOP:          425         425         425         330
 AREA DISC V START:            2           2           2         208
 AREA DISC V  STOP:          422         422         422         284
  
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3177
 Mean   RA/DEC/ROLL :      308.1550      41.0243     290.3177
 Pnt    RA/DEC/ROLL :      308.1595      41.0551     290.3177
 
 Image rebin factor :             4
 Attitude Records   :         20883
 Hot Pixels         :            25
 GTI intervals      :            15
 Total GTI (secs)   :      6671.463
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        896.00       896.00
  20 Percent Complete: Total/live time:       1813.32      1813.32
  30 Percent Complete: Total/live time:       3007.85      3007.85
  40 Percent Complete: Total/live time:       3007.85      3007.85
  50 Percent Complete: Total/live time:       3699.68      3699.68
  60 Percent Complete: Total/live time:       4168.30      4168.30
  70 Percent Complete: Total/live time:       5059.09      5059.09
  80 Percent Complete: Total/live time:       5876.09      5876.09
  90 Percent Complete: Total/live time:       6671.46      6671.46
 100 Percent Complete: Total/live time:       6671.46      6671.46
 
 Number of attitude steps  used:           17
 Number of attitude steps avail:        15204
 Mean RA/DEC pixel offset:      -65.5862     -26.0578
 
    writing expo file: ad47005030s100102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030s100102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030s100102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   121784 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784    121784              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121784    121784              0         0         0         0
   in  6671.5     seconds
 Image            has   121784 counts for  18.25     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784     10170              0         0         0    111614
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121784     10170              0         0         0    111614
   in  6671.5     seconds
 Image            has    10170 counts for  1.524     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784    111692              0         0         0     10092
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121784    111692              0         0         0     10092
   in  6671.5     seconds
 Image            has   111692 counts for  16.74     counts/sec
 Command not found; type ? for a command listing
!ad47005030s100102h:ASCA >
!ad47005030s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030s100102h:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s100102h:ASCA > read events ad47005030s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad47005030s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad47005030s100102h:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100102_all.img
Wrote image to file ad47005030s100102_all.img
!ad47005030s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad47005030s100102h:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100102_lo.img
Wrote image to file ad47005030s100102_lo.img
!ad47005030s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad47005030s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47005030s100102h:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100102_hi.img
Wrote image to file ad47005030s100102_hi.img
!ad47005030s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad47005030s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47005030s100202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad47005030s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL          ON
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT          IN
 AREA DISC H START:            6           6           6         254
 AREA DISC H  STOP:          425         425         425         330
 AREA DISC V START:            2           2           2         208
 AREA DISC V  STOP:          422         422         422         284
  
    reading att  file: ./fa990506_0440.1240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      308.1556      41.0408     290.3169
 Mean   RA/DEC/ROLL :      308.1595      41.0330     290.3169
 Pnt    RA/DEC/ROLL :      308.0617      40.8808     290.3169
 
 Image rebin factor :             4
 Attitude Records   :         20883
 Hot Pixels         :            16
 GTI intervals      :             6
 Total GTI (secs)   :      1940.579
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        222.99       222.99
  20 Percent Complete: Total/live time:        572.18       572.18
  30 Percent Complete: Total/live time:       1112.37      1112.37
  40 Percent Complete: Total/live time:       1112.37      1112.37
  50 Percent Complete: Total/live time:       1784.37      1784.37
  60 Percent Complete: Total/live time:       1784.37      1784.37
  70 Percent Complete: Total/live time:       1784.49      1784.49
  80 Percent Complete: Total/live time:       1784.49      1784.49
  90 Percent Complete: Total/live time:       1940.58      1940.58
 100 Percent Complete: Total/live time:       1940.58      1940.58
 
 Number of attitude steps  used:           16
 Number of attitude steps avail:          945
 Mean RA/DEC pixel offset:      -55.5117     -18.7788
 
    writing expo file: ad47005030s100202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad47005030s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47005030s100202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    22336 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336     22336              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22336     22336              0         0         0         0
   in  1940.6     seconds
 Image            has    22336 counts for  11.51     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336      2073              0         0         0     20263
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22336      2073              0         0         0     20263
   in  1940.6     seconds
 Image            has     2073 counts for  1.068     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336     20275              0         0         0      2061
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22336     20275              0         0         0      2061
   in  1940.6     seconds
 Image            has    20275 counts for  10.45     counts/sec
 Command not found; type ? for a command listing
!ad47005030s100202m:ASCA >
!ad47005030s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47005030s100202m:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s100202m:ASCA > read events ad47005030s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!ad47005030s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad47005030s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad47005030s100202m:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100202_all.img
Wrote image to file ad47005030s100202_all.img
!ad47005030s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad47005030s100202m:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100202_lo.img
Wrote image to file ad47005030s100202_lo.img
!ad47005030s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad47005030s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47005030s100202m:ASCA-SIS1-BRIGHT > extract image
!ad47005030s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad47005030s100202_hi.img
Wrote image to file ad47005030s100202_hi.img
!ad47005030s100202m:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Exposure for ad47005030s000102.expo is 6663.115723 seconds
-> Exposure for ad47005030s000202.expo is 1944.390015 seconds
-> Exposure for ad47005030s100102.expo is 6671.462891 seconds
-> Exposure for ad47005030s100202.expo is 1940.578979 seconds
-> Summing the following images to produce ad47005030sis32002.totexpo

ad47005030s000102.expo
ad47005030s000202.expo
ad47005030s100102.expo
ad47005030s100202.expo

-> Setting EXPOSURE=17219.547608 in ad47005030sis32002.totexpo
-> Exposure for ad47005030s000102_all.img is 6.663115676492453E+03 seconds
-> ad47005030s000102_all.img has 150238 counts
-> Exposure for ad47005030s000202_all.img is 1.944390067458153E+03 seconds
-> ad47005030s000202_all.img has 26723 counts
-> Exposure for ad47005030s100102_all.img is 6.671462710708380E+03 seconds
-> ad47005030s100102_all.img has 121784 counts
-> Exposure for ad47005030s100202_all.img is 1.940579031974077E+03 seconds
-> ad47005030s100202_all.img has 22336 counts
-> Summing the following images to produce ad47005030sis32002_all.totsky

ad47005030s000102_all.img
ad47005030s000202_all.img
ad47005030s100102_all.img
ad47005030s100202_all.img

-> Setting EXPOSURE=17219.5474866331 in ad47005030sis32002_all.totsky
-> Setting TOTCTS=321081 in ad47005030sis32002_all.totsky
-> Exposure for ad47005030s000102_lo.img is 6.663115676492453E+03 seconds
-> ad47005030s000102_lo.img has 11978 counts
-> Exposure for ad47005030s000202_lo.img is 1.944390067458153E+03 seconds
-> ad47005030s000202_lo.img has 2316 counts
-> Exposure for ad47005030s100102_lo.img is 6.671462710708380E+03 seconds
-> ad47005030s100102_lo.img has 10170 counts
-> Exposure for ad47005030s100202_lo.img is 1.940579031974077E+03 seconds
-> ad47005030s100202_lo.img has 2073 counts
-> Summing the following images to produce ad47005030sis32002_lo.totsky

ad47005030s000102_lo.img
ad47005030s000202_lo.img
ad47005030s100102_lo.img
ad47005030s100202_lo.img

-> Setting EXPOSURE=17219.5474866331 in ad47005030sis32002_lo.totsky
-> Setting TOTCTS=26537 in ad47005030sis32002_lo.totsky
-> Exposure for ad47005030s000102_hi.img is 6.663115676492453E+03 seconds
-> ad47005030s000102_hi.img has 138355 counts
-> Exposure for ad47005030s000202_hi.img is 1.944390067458153E+03 seconds
-> ad47005030s000202_hi.img has 24417 counts
-> Exposure for ad47005030s100102_hi.img is 6.671462710708380E+03 seconds
-> ad47005030s100102_hi.img has 111692 counts
-> Exposure for ad47005030s100202_hi.img is 1.940579031974077E+03 seconds
-> ad47005030s100202_hi.img has 20275 counts
-> Summing the following images to produce ad47005030sis32002_hi.totsky

ad47005030s000102_hi.img
ad47005030s000202_hi.img
ad47005030s100102_hi.img
ad47005030s100202_hi.img

-> Setting EXPOSURE=17219.5474866331 in ad47005030sis32002_hi.totsky
-> Setting TOTCTS=294739 in ad47005030sis32002_hi.totsky
-> Running XIMAGE to create ad47005030sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad47005030sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 751.00000
 Saving current map
![2]XIMAGE> read/expo ad47005030sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 286.99246
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     1.00000
  Min and max :   0  566
 Max-preserving scaling factor :     1.3268551
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     71151.7
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

-> Summing gis images
-> Exposure for ad47005030g200170.expo is 7022.101074 seconds
-> Exposure for ad47005030g200270.expo is 1231.930176 seconds
-> Exposure for ad47005030g200370.expo is 127.868973 seconds
-> Exposure for ad47005030g300170.expo is 7018.101074 seconds
-> Exposure for ad47005030g300270.expo is 1231.930176 seconds
-> Exposure for ad47005030g300370.expo is 127.868973 seconds
-> Summing the following images to produce ad47005030gis25670.totexpo

ad47005030g200170.expo
ad47005030g200270.expo
ad47005030g200370.expo
ad47005030g300170.expo
ad47005030g300270.expo
ad47005030g300370.expo

-> Setting EXPOSURE=16759.800446 in ad47005030gis25670.totexpo
-> Exposure for ad47005030g200170_all.img is 7.022100763410330E+03 seconds
-> ad47005030g200170_all.img has 160406 counts
-> Exposure for ad47005030g200270_all.img is 1.231930203944445E+03 seconds
-> ad47005030g200270_all.img has 18202 counts
-> Exposure for ad47005030g200370_all.img is 1.278689706921577E+02 seconds
-> ad47005030g200370_all.img has 490 counts
-> Exposure for ad47005030g300170_all.img is 7.018100775748491E+03 seconds
-> ad47005030g300170_all.img has 182254 counts
-> Exposure for ad47005030g300270_all.img is 1.231930203944445E+03 seconds
-> ad47005030g300270_all.img has 18889 counts
-> Exposure for ad47005030g300370_all.img is 1.278689706921577E+02 seconds
-> ad47005030g300370_all.img has 492 counts
-> Summing the following images to produce ad47005030gis25670_all.totsky

ad47005030g200170_all.img
ad47005030g200270_all.img
ad47005030g200370_all.img
ad47005030g300170_all.img
ad47005030g300270_all.img
ad47005030g300370_all.img

-> Setting EXPOSURE=16759.799888432 in ad47005030gis25670_all.totsky
-> Setting TOTCTS=380733 in ad47005030gis25670_all.totsky
-> Exposure for ad47005030g200170_lo.img is 7.022100763410330E+03 seconds
-> ad47005030g200170_lo.img has 14840 counts
-> Exposure for ad47005030g200270_lo.img is 1.231930203944445E+03 seconds
-> ad47005030g200270_lo.img has 1659 counts
-> Exposure for ad47005030g200370_lo.img is 1.278689706921577E+02 seconds
-> ad47005030g200370_lo.img has 53 counts
-> Exposure for ad47005030g300170_lo.img is 7.018100775748491E+03 seconds
-> ad47005030g300170_lo.img has 16061 counts
-> Exposure for ad47005030g300270_lo.img is 1.231930203944445E+03 seconds
-> ad47005030g300270_lo.img has 1600 counts
-> Exposure for ad47005030g300370_lo.img is 1.278689706921577E+02 seconds
-> ad47005030g300370_lo.img has 56 counts
-> Summing the following images to produce ad47005030gis25670_lo.totsky

ad47005030g200170_lo.img
ad47005030g200270_lo.img
ad47005030g200370_lo.img
ad47005030g300170_lo.img
ad47005030g300270_lo.img
ad47005030g300370_lo.img

-> Setting EXPOSURE=16759.799888432 in ad47005030gis25670_lo.totsky
-> Setting TOTCTS=34269 in ad47005030gis25670_lo.totsky
-> Exposure for ad47005030g200170_hi.img is 7.022100763410330E+03 seconds
-> ad47005030g200170_hi.img has 145855 counts
-> Exposure for ad47005030g200270_hi.img is 1.231930203944445E+03 seconds
-> ad47005030g200270_hi.img has 16580 counts
-> Exposure for ad47005030g200370_hi.img is 1.278689706921577E+02 seconds
-> ad47005030g200370_hi.img has 438 counts
-> Exposure for ad47005030g300170_hi.img is 7.018100775748491E+03 seconds
-> ad47005030g300170_hi.img has 166534 counts
-> Exposure for ad47005030g300270_hi.img is 1.231930203944445E+03 seconds
-> ad47005030g300270_hi.img has 17314 counts
-> Exposure for ad47005030g300370_hi.img is 1.278689706921577E+02 seconds
-> ad47005030g300370_hi.img has 437 counts
-> Summing the following images to produce ad47005030gis25670_hi.totsky

ad47005030g200170_hi.img
ad47005030g200270_hi.img
ad47005030g200370_hi.img
ad47005030g300170_hi.img
ad47005030g300270_hi.img
ad47005030g300370_hi.img

-> Setting EXPOSURE=16759.799888432 in ad47005030gis25670_hi.totsky
-> Setting TOTCTS=347158 in ad47005030gis25670_hi.totsky
-> Running XIMAGE to create ad47005030gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad47005030gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 3005.0000
 Saving current map
![2]XIMAGE> read/expo ad47005030gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 279.33002
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     1.00000
  Min and max :   0  2143
 Max-preserving scaling factor :     1.4022399
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     5605.10
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (16:0:49)

-> Smoothing ad47005030gis25670_all.totsky with ad47005030gis25670.totexpo
-> Clipping exposures below 2513.9700669 seconds
-> Detecting sources in ad47005030gis25670_all.smooth
-> Standard Output From STOOL ascasource:

139 108 0.137319 116 7 2939.82

-> Smoothing ad47005030gis25670_hi.totsky with ad47005030gis25670.totexpo
-> Clipping exposures below 2513.9700669 seconds
-> Detecting sources in ad47005030gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

139 108 0.131094 116 7 4026.35

-> Smoothing ad47005030gis25670_lo.totsky with ad47005030gis25670.totexpo
-> Clipping exposures below 2513.9700669 seconds
-> Detecting sources in ad47005030gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

139 109 0.00673569 115 8 424.352

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

139 108 24 F

-> Sources with radius >= 2

139 108 24 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad47005030gis25670.src
-> Smoothing ad47005030sis32002_all.totsky with ad47005030sis32002.totexpo
-> Clipping exposures below 2582.9321412 seconds
-> Detecting sources in ad47005030sis32002_all.smooth
-> Standard Output From STOOL ascasource:

182 113 0.0428627 91 11 1044.24

-> Smoothing ad47005030sis32002_hi.totsky with ad47005030sis32002.totexpo
-> Clipping exposures below 2582.9321412 seconds
-> Detecting sources in ad47005030sis32002_hi.smooth
-> Standard Output From STOOL ascasource:

182 113 0.0402536 91 11 1146.54

-> Smoothing ad47005030sis32002_lo.totsky with ad47005030sis32002.totexpo
-> Clipping exposures below 2582.9321412 seconds
-> Detecting sources in ad47005030sis32002_lo.smooth
-> Standard Output From STOOL ascasource:

182 114 0.00275808 92 12 362.107

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

182 113 38 T

-> Sources with radius >= 2

182 113 38 T

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad47005030sis32002.src
-> Generating region files
-> Converting (728.0,452.0,2.0) to s0 detector coordinates
-> Using events in: ad47005030s000102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   151514.00
 The mean of the selected column is                  460.52888
 The standard deviation of the selected column is    4.7124561
 The minimum of selected column is                   453.00000
 The maximum of selected column is                   473.00000
 The number of points used in calculation is              329

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   145684.00
 The mean of the selected column is                  442.80851
 The standard deviation of the selected column is    5.3581873
 The minimum of selected column is                   436.00000
 The maximum of selected column is                   455.00000
 The number of points used in calculation is              329

-> Converting (728.0,452.0,2.0) to s1 detector coordinates
-> Using events in: ad47005030s100102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   112845.00
 The mean of the selected column is                  458.71951
 The standard deviation of the selected column is    4.6456679
 The minimum of selected column is                   451.00000
 The maximum of selected column is                   470.00000
 The number of points used in calculation is              246

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   117878.00
 The mean of the selected column is                  479.17886
 The standard deviation of the selected column is    5.5864742
 The minimum of selected column is                   471.00000
 The maximum of selected column is                   489.00000
 The number of points used in calculation is              246

-> Converting (139.0,108.0,2.0) to g2 detector coordinates
-> Using events in: ad47005030g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1174874.0
 The mean of the selected column is                  106.43903
 The standard deviation of the selected column is    1.1368476
 The minimum of selected column is                   103.00000
 The maximum of selected column is                   110.00000
 The number of points used in calculation is            11038

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1219784.0
 The mean of the selected column is                  110.50770
 The standard deviation of the selected column is    1.1745715
 The minimum of selected column is                   107.00000
 The maximum of selected column is                   114.00000
 The number of points used in calculation is            11038

-> Converting (139.0,108.0,2.0) to g3 detector coordinates
-> Using events in: ad47005030g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1977673.0
 The mean of the selected column is                  112.30398
 The standard deviation of the selected column is    1.1321311
 The minimum of selected column is                   109.00000
 The maximum of selected column is                   116.00000
 The number of points used in calculation is            17610

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1956175.0
 The mean of the selected column is                  111.08319
 The standard deviation of the selected column is    1.0959718
 The minimum of selected column is                   108.00000
 The maximum of selected column is                   114.00000
 The number of points used in calculation is            17610

Extracting spectra and generating response matrices (16:4:48)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad47005030s000102h.evt 150238
2 ad47005030s000202m.evt 26723

-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad47005030s010102_1.pi from ad47005030s032002_1.reg and:

ad47005030s000102h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   150238 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238    133689          16549         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150238    133689          16549         0         0         0
   in  6663.1     seconds
 Spectrum         has   133689 counts for  20.06     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 6663.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad47005030s010102_1.pi group=yes
Wrote spectrum to ad47005030s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad47005030s010102_1.pi
-> Grouping ad47005030s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 6663.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      25  are grouped by a factor        3
 ...        26 -      37  are grouped by a factor        2
 ...        38 -     291  are single channels
 ...       292 -     293  are grouped by a factor        2
 ...       294 -     297  are single channels
 ...       298 -     303  are grouped by a factor        2
 ...       304 -     304  are single channels
 ...       305 -     318  are grouped by a factor        2
 ...       319 -     321  are grouped by a factor        3
 ...       322 -     325  are grouped by a factor        2
 ...       326 -     331  are grouped by a factor        3
 ...       332 -     335  are grouped by a factor        4
 ...       336 -     338  are grouped by a factor        3
 ...       339 -     346  are grouped by a factor        4
 ...       347 -     349  are grouped by a factor        3
 ...       350 -     354  are grouped by a factor        5
 ...       355 -     358  are grouped by a factor        4
 ...       359 -     364  are grouped by a factor        6
 ...       365 -     369  are grouped by a factor        5
 ...       370 -     381  are grouped by a factor        6
 ...       382 -     389  are grouped by a factor        8
 ...       390 -     399  are grouped by a factor       10
 ...       400 -     411  are grouped by a factor       12
 ...       412 -     433  are grouped by a factor       22
 ...       434 -     484  are grouped by a factor       51
 ...       485 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s010102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 1
-> Fetching sis0c1p40_290296.fits
-> Generating ad47005030s010102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad47005030s010102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  312  288
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.900     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.33468E+05
 Weighted mean angle from optical axis  =  6.169 arcmin

-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad47005030s010202_1.pi from ad47005030s032002_1.reg and:

ad47005030s000202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    26723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723     22176           4547         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26723     22176           4547         0         0         0
   in  1944.4     seconds
 Spectrum         has    22176 counts for  11.41     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1944.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.20120E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s010202_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s010202.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad47005030s010202_1.pi group=yes
Wrote spectrum to ad47005030s010202_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad47005030s010202_1.pi
-> Grouping ad47005030s010202_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1944.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.20120E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      36  are grouped by a factor       10
 ...        37 -      41  are grouped by a factor        5
 ...        42 -      44  are grouped by a factor        3
 ...        45 -      52  are grouped by a factor        2
 ...        53 -     240  are single channels
 ...       241 -     248  are grouped by a factor        2
 ...       249 -     251  are grouped by a factor        3
 ...       252 -     255  are grouped by a factor        2
 ...       256 -     264  are grouped by a factor        3
 ...       265 -     272  are grouped by a factor        4
 ...       273 -     277  are grouped by a factor        5
 ...       278 -     281  are grouped by a factor        4
 ...       282 -     287  are grouped by a factor        6
 ...       288 -     294  are grouped by a factor        7
 ...       295 -     302  are grouped by a factor        8
 ...       303 -     309  are grouped by a factor        7
 ...       310 -     319  are grouped by a factor       10
 ...       320 -     339  are grouped by a factor       20
 ...       340 -     372  are grouped by a factor       33
 ...       373 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s010202_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 1
-> sis0c1p40_290296.fits already present in current directory
-> Generating ad47005030s010202_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad47005030s010202_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  312  288
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   48.410     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 2.20570E+04
 Weighted mean angle from optical axis  =  6.175 arcmin

-> Standard Output From STOOL group_event_files:

1 ad47005030s100102h.evt 121784
2 ad47005030s100202m.evt 22336

-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad47005030s110102_1.pi from ad47005030s132002_1.reg and:

ad47005030s100102h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   121784 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784    109704          12080         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121784    109704          12080         0         0         0
   in  6671.5     seconds
 Spectrum         has   109704 counts for  16.44     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 6671.5          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad47005030s110102_1.pi group=yes
Wrote spectrum to ad47005030s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad47005030s110102_1.pi
-> Grouping ad47005030s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 6671.5          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      20  are grouped by a factor        4
 ...        21 -      29  are grouped by a factor        3
 ...        30 -      35  are grouped by a factor        2
 ...        36 -      36  are single channels
 ...        37 -      38  are grouped by a factor        2
 ...        39 -     277  are single channels
 ...       278 -     279  are grouped by a factor        2
 ...       280 -     281  are single channels
 ...       282 -     283  are grouped by a factor        2
 ...       284 -     286  are single channels
 ...       287 -     290  are grouped by a factor        2
 ...       291 -     291  are single channels
 ...       292 -     311  are grouped by a factor        2
 ...       312 -     323  are grouped by a factor        3
 ...       324 -     327  are grouped by a factor        4
 ...       328 -     333  are grouped by a factor        3
 ...       334 -     337  are grouped by a factor        4
 ...       338 -     347  are grouped by a factor        5
 ...       348 -     351  are grouped by a factor        4
 ...       352 -     357  are grouped by a factor        6
 ...       358 -     364  are grouped by a factor        7
 ...       365 -     372  are grouped by a factor        8
 ...       373 -     381  are grouped by a factor        9
 ...       382 -     393  are grouped by a factor       12
 ...       394 -     409  are grouped by a factor       16
 ...       410 -     432  are grouped by a factor       23
 ...       433 -     461  are grouped by a factor       29
 ...       462 -     511  are grouped by a factor       50
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s110102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 3
-> Fetching sis1c3p40_290296.fits
-> Generating ad47005030s110102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad47005030s110102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  304  328
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.169     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.09553E+05
 Weighted mean angle from optical axis  =  8.874 arcmin

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad47005030s110202_1.pi from ad47005030s132002_1.reg and:

ad47005030s100202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    22336 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336     18615           3721         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22336     18615           3721         0         0         0
   in  1940.6     seconds
 Spectrum         has    18615 counts for  9.592     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1940.6          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.14650E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s110202_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s110202.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad47005030s110202_1.pi group=yes
Wrote spectrum to ad47005030s110202_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad47005030s110202_1.pi
-> Grouping ad47005030s110202_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1940.6          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.14650E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      28  are grouped by a factor       12
 ...        29 -      37  are grouped by a factor        9
 ...        38 -      42  are grouped by a factor        5
 ...        43 -      50  are grouped by a factor        2
 ...        51 -     231  are single channels
 ...       232 -     233  are grouped by a factor        2
 ...       234 -     234  are single channels
 ...       235 -     236  are grouped by a factor        2
 ...       237 -     237  are single channels
 ...       238 -     245  are grouped by a factor        2
 ...       246 -     254  are grouped by a factor        3
 ...       255 -     262  are grouped by a factor        4
 ...       263 -     268  are grouped by a factor        6
 ...       269 -     272  are grouped by a factor        4
 ...       273 -     284  are grouped by a factor        6
 ...       285 -     292  are grouped by a factor        8
 ...       293 -     302  are grouped by a factor       10
 ...       303 -     313  are grouped by a factor       11
 ...       314 -     331  are grouped by a factor       18
 ...       332 -     373  are grouped by a factor       42
 ...       374 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030s110202_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 3
-> sis1c3p40_290296.fits already present in current directory
-> Generating ad47005030s110202_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad47005030s110202_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  304  328
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   47.780     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.85340E+04
 Weighted mean angle from optical axis  =  8.935 arcmin

-> Standard Output From STOOL group_event_files:

1 ad47005030g200170h.evt 179372
1 ad47005030g200270m.evt 179372
1 ad47005030g200370l.evt 179372

-> GIS2_REGION256.4 already present in current directory
-> Extracting ad47005030g210170_1.pi from ad47005030g225670_1.reg and:

ad47005030g200170h.evt
ad47005030g200270m.evt
ad47005030g200370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      490     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656    126706          33950         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226     14290           3936         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490       381            109         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        179372    141377          37995         0         0         0
   in  8381.9     seconds
 Spectrum         has   141377 counts for  16.87     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8381.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47005030g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad47005030g210170_1.pi group=yes
Wrote spectrum to ad47005030g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad47005030g210170_1.pi
-> Correcting ad47005030g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad47005030g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 7598.5          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      25  are grouped by a factor       26
 ...        26 -      40  are grouped by a factor        5
 ...        41 -      48  are grouped by a factor        4
 ...        49 -      51  are grouped by a factor        3
 ...        52 -      55  are grouped by a factor        4
 ...        56 -      61  are grouped by a factor        3
 ...        62 -      65  are grouped by a factor        2
 ...        66 -      71  are grouped by a factor        3
 ...        72 -      77  are grouped by a factor        2
 ...        78 -      80  are grouped by a factor        3
 ...        81 -      82  are grouped by a factor        2
 ...        83 -      85  are grouped by a factor        3
 ...        86 -     105  are grouped by a factor        2
 ...       106 -     697  are single channels
 ...       698 -     699  are grouped by a factor        2
 ...       700 -     700  are single channels
 ...       701 -     706  are grouped by a factor        2
 ...       707 -     712  are single channels
 ...       713 -     714  are grouped by a factor        2
 ...       715 -     715  are single channels
 ...       716 -     747  are grouped by a factor        2
 ...       748 -     748  are single channels
 ...       749 -     770  are grouped by a factor        2
 ...       771 -     773  are grouped by a factor        3
 ...       774 -     789  are grouped by a factor        2
 ...       790 -     792  are grouped by a factor        3
 ...       793 -     794  are grouped by a factor        2
 ...       795 -     818  are grouped by a factor        3
 ...       819 -     822  are grouped by a factor        4
 ...       823 -     828  are grouped by a factor        3
 ...       829 -     830  are grouped by a factor        2
 ...       831 -     836  are grouped by a factor        3
 ...       837 -     840  are grouped by a factor        4
 ...       841 -     846  are grouped by a factor        3
 ...       847 -     854  are grouped by a factor        4
 ...       855 -     904  are grouped by a factor        5
 ...       905 -     910  are grouped by a factor        6
 ...       911 -     914  are grouped by a factor        4
 ...       915 -     929  are grouped by a factor        5
 ...       930 -     935  are grouped by a factor        6
 ...       936 -     942  are grouped by a factor        7
 ...       943 -     950  are grouped by a factor        8
 ...       951 -     959  are grouped by a factor        9
 ...       960 -     967  are grouped by a factor        8
 ...       968 -     977  are grouped by a factor       10
 ...       978 -     991  are grouped by a factor       14
 ...       992 -    1004  are grouped by a factor       13
 ...      1005 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g210170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad47005030g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   43   48
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  105.50  110.50 (detector coordinates)
 Point source at   27.50   20.46 (WMAP bins wrt optical axis)
 Point source at    8.42   36.65 (... in polar coordinates)
 
 Total counts in region = 1.41043E+05
 Weighted mean angle from optical axis  =  8.099 arcmin

-> Standard Output From STOOL group_event_files:

1 ad47005030g300170h.evt 201879
1 ad47005030g300270m.evt 201879
1 ad47005030g300370l.evt 201879

-> GIS3_REGION256.4 already present in current directory
-> Extracting ad47005030g310170_1.pi from ad47005030g325670_1.reg and:

ad47005030g300170h.evt
ad47005030g300270m.evt
ad47005030g300370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      493     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470    148144          34326         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916     15231           3685         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493       409             84         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        201879    163784          38095         0         0         0
   in  8377.9     seconds
 Spectrum         has   163784 counts for  19.55     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8377.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47005030g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad47005030g310170_1.pi group=yes
Wrote spectrum to ad47005030g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad47005030g310170_1.pi
-> Correcting ad47005030g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad47005030g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 7472.8          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      23  are grouped by a factor       24
 ...        24 -      32  are grouped by a factor        3
 ...        33 -      40  are grouped by a factor        4
 ...        41 -      49  are grouped by a factor        3
 ...        50 -      53  are grouped by a factor        4
 ...        54 -      59  are grouped by a factor        3
 ...        60 -     103  are grouped by a factor        2
 ...       104 -     721  are single channels
 ...       722 -     723  are grouped by a factor        2
 ...       724 -     725  are single channels
 ...       726 -     727  are grouped by a factor        2
 ...       728 -     728  are single channels
 ...       729 -     730  are grouped by a factor        2
 ...       731 -     733  are single channels
 ...       734 -     735  are grouped by a factor        2
 ...       736 -     737  are single channels
 ...       738 -     739  are grouped by a factor        2
 ...       740 -     742  are single channels
 ...       743 -     746  are grouped by a factor        2
 ...       747 -     749  are single channels
 ...       750 -     753  are grouped by a factor        2
 ...       754 -     754  are single channels
 ...       755 -     758  are grouped by a factor        2
 ...       759 -     759  are single channels
 ...       760 -     761  are grouped by a factor        2
 ...       762 -     762  are single channels
 ...       763 -     810  are grouped by a factor        2
 ...       811 -     813  are grouped by a factor        3
 ...       814 -     823  are grouped by a factor        2
 ...       824 -     847  are grouped by a factor        3
 ...       848 -     849  are grouped by a factor        2
 ...       850 -     855  are grouped by a factor        3
 ...       856 -     859  are grouped by a factor        4
 ...       860 -     863  are grouped by a factor        2
 ...       864 -     866  are grouped by a factor        3
 ...       867 -     870  are grouped by a factor        4
 ...       871 -     876  are grouped by a factor        3
 ...       877 -     896  are grouped by a factor        4
 ...       897 -     902  are grouped by a factor        6
 ...       903 -     906  are grouped by a factor        4
 ...       907 -     911  are grouped by a factor        5
 ...       912 -     923  are grouped by a factor        4
 ...       924 -     929  are grouped by a factor        6
 ...       930 -     943  are grouped by a factor        7
 ...       944 -     948  are grouped by a factor        5
 ...       949 -     954  are grouped by a factor        6
 ...       955 -     959  are grouped by a factor        5
 ...       960 -     970  are grouped by a factor       11
 ...       971 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g310170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad47005030g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   49   48
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  111.50  110.50 (detector coordinates)
 Point source at    7.86   23.94 (WMAP bins wrt optical axis)
 Point source at    6.19   71.82 (... in polar coordinates)
 
 Total counts in region = 1.63412E+05
 Weighted mean angle from optical axis  =  5.989 arcmin

-> Plotting ad47005030g210170_1_pi.ps from ad47005030g210170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:22:22 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030g210170_1.pi;
 Net count rate (cts/s) for file   1   18.61    +/-  4.9486E-02
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad47005030g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad47005030g310170_1_pi.ps from ad47005030g310170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:22:35 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030g310170_1.pi;
 Net count rate (cts/s) for file   1   21.92    +/-  5.4164E-02
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad47005030g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad47005030s010102_1_pi.ps from ad47005030s010102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:22:48 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030s010102_1.pi;
 Net count rate (cts/s) for file   1   20.06    +/-  5.4881E-02
   using response (RMF) file...       ad47005030s010102_1.rmf
   using auxiliary (ARF) file...      ad47005030s010102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad47005030s010202_1_pi.ps from ad47005030s010202_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:23:01 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030s010202_1.pi;
 Net count rate (cts/s) for file   1   11.41    +/-  7.6805E-02
   using response (RMF) file...       ad47005030s010202_1.rmf
   using auxiliary (ARF) file...      ad47005030s010202_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad47005030s110102_1_pi.ps from ad47005030s110102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:23:14 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030s110102_1.pi;
 Net count rate (cts/s) for file   1   16.44    +/-  4.9650E-02
   using response (RMF) file...       ad47005030s110102_1.rmf
   using auxiliary (ARF) file...      ad47005030s110102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad47005030s110202_1_pi.ps from ad47005030s110202_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:23:27 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47005030s110202_1.pi;
 Net count rate (cts/s) for file   1   9.592    +/-  7.0552E-02
   using response (RMF) file...       ad47005030s110202_1.rmf
   using auxiliary (ARF) file...      ad47005030s110202_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (16:23:30)

-> TIMEDEL=4.0000000000E+00 for ad47005030s000102h.evt
-> TIMEDEL=4.0000000000E+00 for ad47005030s000202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad47005030s032002_1.reg
-> ... and files: ad47005030s000102h.evt ad47005030s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   150238 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    26723 0100
      2 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   150238 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238    133689          16549         0         0         0
 Writing events file
 133689 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723     22265           4458         0         0         0
 Writing events file
 155954 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        176961    155954          21007         0         0         0
   in  8607.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad47005030s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting ad47005030s000002_1.lc with binsize 4.0000000000E+00
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  04:40:18    0.86E+04   155954 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         155954    155954              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        155954    155954              0         0         0         0
   in  8607.5     seconds
 Fits light curve has   155954 counts for  18.12     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad47005030s000002_1.lc
Wrote FITS light curve to file ad47005030s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Plotting ad47005030s000002_1.lc in ad47005030s000002_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47005030s000002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ CYGNUS X-3          Start Time (d) .... 11304 05:33:18.492
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11304 12:34:38.492
 No. of Rows .......         2152        Bin Time (s) ......    4.000
 Right Ascension ... 3.0816E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.1041E+01          Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11304.23146402312  (days)       5:33:18:492  (h:m:s:ms)
 Expected Stop .... 11304.52405661571  (days)      12:34:38:492  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..             6321
 
 Default Newbin Time is:   49.432929    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     49.432929      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       49.4329     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11304  5:33:43
     Ser.1     Avg  17.97        Chisq 0.1479E+05   Var  33.32     Newbs.    186
               Min  6.475          Max  32.42    expVar 0.4238      Bins   2152
PLT> @lightcurve.pco
!PLT> dev ad47005030s000002_1_lc.ps/ps
!PLT> LA File ad47005030s000002_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=4.0000000000E+00 for ad47005030s100102h.evt
-> TIMEDEL=4.0000000000E+00 for ad47005030s100202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad47005030s132002_1.reg
-> ... and files: ad47005030s100102h.evt ad47005030s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   121784 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    22336 0001
      2 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   121784 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784    109812          11972         0         0         0
 Writing events file
 109812 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336     19157           3179         0         0         0
 Writing events file
 128969 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        144120    128969          15151         0         0         0
   in  8612.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad47005030s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting ad47005030s100002_1.lc with binsize 4.0000000000E+00
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  04:40:18    0.86E+04   128969 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         128969    128969              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        128969    128969              0         0         0         0
   in  8612.0     seconds
 Fits light curve has   128969 counts for  14.98     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad47005030s100002_1.lc
Wrote FITS light curve to file ad47005030s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Plotting ad47005030s100002_1.lc in ad47005030s100002_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47005030s100002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ CYGNUS X-3          Start Time (d) .... 11304 05:33:18.492
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11304 12:34:38.492
 No. of Rows .......         2153        Bin Time (s) ......    4.000
 Right Ascension ... 3.0816E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.1041E+01          Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11304.23146402312  (days)       5:33:18:492  (h:m:s:ms)
 Expected Stop .... 11304.52405661571  (days)      12:34:38:492  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..             6321
 
 Default Newbin Time is:   49.432929    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     49.432929      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       49.4329     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11304  5:33:43
     Ser.1     Avg  14.86        Chisq 0.1222E+05   Var  22.58     Newbs.    187
               Min  5.542          Max  27.58    expVar 0.3545      Bins   2153
PLT> @lightcurve.pco
!PLT> dev ad47005030s100002_1_lc.ps/ps
!PLT> LA File ad47005030s100002_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=6.2500000000E-02 for ad47005030g200170h.evt
-> TIMEDEL=5.0000000000E-01 for ad47005030g200270m.evt
-> TIMEDEL=2.0000000000E+00 for ad47005030g200370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad47005030g225670_1.reg
-> ... and files: ad47005030g200170h.evt ad47005030g200270m.evt ad47005030g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      490     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656    126706          33950         0         0         0
 Writing events file
 126706 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226     14290           3936         0         0         0
 Writing events file
 140996 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490       381            109         0         0         0
 Writing events file
 141377 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        179372    141377          37995         0         0         0
   in  8381.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47005030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad47005030g200070_1.lc with binsize 2.96437876720084
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  04:40:30    0.84E+04   141377     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         141377    141377              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        141377    141377              0         0         0         0
   in  8381.9     seconds
 Fits light curve has   141377 counts for  16.87     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set binsize 2.96437876720084
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad47005030g200070_1.lc
Wrote FITS light curve to file ad47005030g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting ad47005030g200070_1.lc in ad47005030g200070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47005030g200070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ CYGNUS X-3          Start Time (d) .... 11304 05:33:18.492
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11304 12:31:26.404
 No. of Rows .......         2827        Bin Time (s) ......    2.964
 Right Ascension ... 3.0816E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.1041E+01          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11304.23146402312  (days)       5:33:18:492  (h:m:s:ms)
 Expected Stop .... 11304.52183337640  (days)      12:31:26:404  (h:m:s:ms)
 
 Minimum Newbin Time    2.9643788      (s)
 for Maximum Newbin No..             8464
 
 Default Newbin Time is:   49.057317    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     49.057317      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       49.0573     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11304  5:33:43
     Ser.1     Avg  16.64        Chisq 0.1107E+05   Var  26.23     Newbs.    183
               Min  2.431          Max  30.65    expVar 0.3966      Bins   2827
PLT> @lightcurve.pco
!PLT> dev ad47005030g200070_1_lc.ps/ps
!PLT> LA File ad47005030g200070_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=6.2500000000E-02 for ad47005030g300170h.evt
-> TIMEDEL=5.0000000000E-01 for ad47005030g300270m.evt
-> TIMEDEL=2.0000000000E+00 for ad47005030g300370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad47005030g325670_1.reg
-> ... and files: ad47005030g300170h.evt ad47005030g300270m.evt ad47005030g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      493     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470    148144          34326         0         0         0
 Writing events file
 148144 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916     15231           3685         0         0         0
 Writing events file
 163375 events written to the output file
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493       409             84         0         0         0
 Writing events file
 163784 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        201879    163784          38095         0         0         0
   in  8377.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47005030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad47005030g300070_1.lc with binsize 2.55760622275351
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  04:40:30    0.84E+04   163784     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         163784    163784              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        163784    163784              0         0         0         0
   in  8377.9     seconds
 Fits light curve has   163784 counts for  19.55     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set binsize 2.55760622275351
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad47005030g300070_1.lc
Wrote FITS light curve to file ad47005030g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting ad47005030g300070_1.lc in ad47005030g300070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47005030g300070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ CYGNUS X-3          Start Time (d) .... 11304 05:33:18.492
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11304 12:31:26.404
 No. of Rows .......         3275        Bin Time (s) ......    2.558
 Right Ascension ... 3.0816E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.1041E+01          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11304.23146402312  (days)       5:33:18:492  (h:m:s:ms)
 Expected Stop .... 11304.52183337640  (days)      12:31:26:404  (h:m:s:ms)
 
 Minimum Newbin Time    2.5576062      (s)
 for Maximum Newbin No..             9810
 
 Default Newbin Time is:   49.057317    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     49.057317      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       49.0573     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11304  5:33:43
     Ser.1     Avg  19.24        Chisq 0.1443E+05   Var  38.13     Newbs.    183
               Min  2.932          Max  36.53    expVar 0.4520      Bins   3275
PLT> @lightcurve.pco
!PLT> dev ad47005030g300070_1_lc.ps/ps
!PLT> LA File ad47005030g300070_1.lc
!PLT> plot
!PLT> quit

-> Merging GTIs from the following files:

ad47005030g200170h.evt[2]
ad47005030g200270m.evt[2]
ad47005030g200370l.evt[2]

-> Making L1 light curve of ft990506_0440_1240G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  53456 output records from   53471  good input G2_L1    records.

-> Making L1 light curve of ft990506_0440_1240G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   8240 output records from   54703  good input G2_L1    records.

-> Merging GTIs from the following files:

ad47005030g300170h.evt[2]
ad47005030g300270m.evt[2]
ad47005030g300370l.evt[2]

-> Making L1 light curve of ft990506_0440_1240G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  54068 output records from   54083  good input G3_L1    records.

-> Making L1 light curve of ft990506_0440_1240G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   8232 output records from   55315  good input G3_L1    records.

Extracting source event files (16:28:15)

-> Extracting unbinned light curve ad47005030g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   160656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         160656    126706          33950         0         0         0
 Writing events file
 126706 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160656    126706          33950         0         0         0
   in  7022.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47005030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad47005030g200170.ulc use_events=yes
Wrote events list to file ad47005030g200170.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18226     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18226     14290           3936         0         0         0
 Writing events file
  14290 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18226     14290           3936         0         0         0
   in  1231.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47005030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad47005030g200270.ulc use_events=yes
Wrote events list to file ad47005030g200270.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030g200370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      490     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            490       381            109         0         0         0
 Writing events file
    381 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           490       381            109         0         0         0
   in  127.87     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47005030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad47005030g200370.ulc use_events=yes
Wrote events list to file ad47005030g200370.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.70E+04   182470     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         182470    148144          34326         0         0         0
 Writing events file
 148144 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182470    148144          34326         0         0         0
   in  7018.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47005030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47005030g300170.ulc use_events=yes
Wrote events list to file ad47005030g300170.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.12E+04    18916     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          18916     15231           3685         0         0         0
 Writing events file
  15231 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         18916     15231           3685         0         0         0
   in  1231.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47005030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47005030g300270.ulc use_events=yes
Wrote events list to file ad47005030g300270.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030g300370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.13E+03      493     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            493       409             84         0         0         0
 Writing events file
    409 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           493       409             84         0         0         0
   in  127.87     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47005030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47005030g300370.ulc use_events=yes
Wrote events list to file ad47005030g300370.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad47005030s000102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   150238 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         150238    133689          16549         0         0         0
 Writing events file
 133689 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150238    133689          16549         0         0         0
   in  6663.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad47005030s000102.ulc use_events=yes
Wrote events list to file ad47005030s000102.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad47005030s000202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    26723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26723     22265           4458         0         0         0
 Writing events file
  22265 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26723     22265           4458         0         0         0
   in  1944.4     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47005030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad47005030s000202.ulc use_events=yes
Wrote events list to file ad47005030s000202.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad47005030s100102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.67E+04   121784 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         121784    109812          11972         0         0         0
 Writing events file
 109812 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121784    109812          11972         0         0         0
   in  6671.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad47005030s100102.ulc use_events=yes
Wrote events list to file ad47005030s100102.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad47005030s100202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.19E+04    22336 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          22336     19157           3179         0         0         0
 Writing events file
  19157 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22336     19157           3179         0         0         0
   in  1940.6     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47005030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad47005030s100202.ulc use_events=yes
Wrote events list to file ad47005030s100202.ulc
Changing Data directory from:
    /data/data14/seq_proc/ad0_47005030.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

Extracting FRAME mode data (16:31:20)

-> Extracting FRAME mode data from ft990506_0440.1240
-> stdout output from tlmFrm

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 5305
frame data: 200127014.4675 ---> 200127158.467059 
     S0, C0, 4 ccd mode;  Output File = fr990506_0440.1240_s0c0m4a.fits
frame data: 200127178.466998 ---> 200127322.466558 
     S0, C1, 4 ccd mode;  Output File = fr990506_0440.1240_s0c1m4a.fits
frame data: 200127342.466496 ---> 200127486.466056 
     S0, C2, 4 ccd mode;  Output File = fr990506_0440.1240_s0c2m4a.fits
frame data: 200127506.465995 ---> 200127650.465554 
     S0, C3, 4 ccd mode;  Output File = fr990506_0440.1240_s0c3m4a.fits
frame data: 200132706.449832 ---> 200132850.449391 
     S1, C2, 4 ccd mode;  Output File = fr990506_0440.1240_s1c2m4a.fits
frame data: 200132870.449329 ---> 200133014.448888 
     S1, C3, 4 ccd mode;  Output File = fr990506_0440.1240_s1c3m4a.fits
frame data: 200133034.448827 ---> 200133178.448386 
     S1, C0, 4 ccd mode;  Output File = fr990506_0440.1240_s1c0m4a.fits
frame data: 200133198.448325 ---> 200133342.447883 
     S1, C1, 4 ccd mode;  Output File = fr990506_0440.1240_s1c1m4a.fits

Total of 8 sets of frame data are extracted.

-> Processing frame fr990506_0440.1240_s0c0m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990506_0440.1240_s0c0m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 340

-> Adding keywords to fr990506_0440.1240_s0c0m4a.fits
-> Processing frame fr990506_0440.1240_s0c1m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990506_0440.1240_s0c1m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 302

-> Adding keywords to fr990506_0440.1240_s0c1m4a.fits
-> Processing frame fr990506_0440.1240_s0c2m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990506_0440.1240_s0c2m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 338

-> Adding keywords to fr990506_0440.1240_s0c2m4a.fits
-> Processing frame fr990506_0440.1240_s0c3m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990506_0440.1240_s0c3m4a.fits
Output zero level image : leveled_frame.tmp
Warning: some pixels in the image have bad value
Bias level = 318

-> Adding keywords to fr990506_0440.1240_s0c3m4a.fits
-> Processing frame fr990506_0440.1240_s1c0m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990506_0440.1240_s1c0m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 229

-> Adding keywords to fr990506_0440.1240_s1c0m4a.fits
-> Processing frame fr990506_0440.1240_s1c1m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990506_0440.1240_s1c1m4a.fits
Output zero level image : leveled_frame.tmp
Warning: some pixels in the image have bad value
Bias level = 196

-> Adding keywords to fr990506_0440.1240_s1c1m4a.fits
-> Processing frame fr990506_0440.1240_s1c2m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990506_0440.1240_s1c2m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 188

-> Adding keywords to fr990506_0440.1240_s1c2m4a.fits
-> Processing frame fr990506_0440.1240_s1c3m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990506_0440.1240_s1c3m4a.fits
Output zero level image : leveled_frame.tmp
Warning: some pixels in the image have bad value
Bias level = 223

-> Adding keywords to fr990506_0440.1240_s1c3m4a.fits
-> Extracting corner pixel histograms

Extracting GIS calibration source spectra (16:32:31)

-> Standard Output From STOOL group_event_files:

1 ad47005030g200170h.unf 261300
1 ad47005030g200270m.unf 261300
1 ad47005030g200370l.unf 261300
1 ad47005030g200470l.unf 261300

-> Fetching GIS2_CALSRC256.2
-> Extracting ad47005030g220170.cal from ad47005030g200170h.unf ad47005030g200270m.unf ad47005030g200370l.unf ad47005030g200470l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14826     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      688     1024
      3 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14826     1024
      4 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         195847      1286         194561         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49939       355          49584         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14826      1030          13796         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            688        37            651         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        261300      2708         258592         0         0         0
   in  20998.     seconds
 Spectrum         has     2708 counts for 0.1290     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 20998.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > read events ad47005030g200470l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad47005030g220170.cal group=yes
Wrote spectrum to ad47005030g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad47005030g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad47005030g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:33:13 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad47005030g220170.cal;
 Net count rate (cts/s) for file   1  0.1290    +/-  2.4874E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     2.4467048E+07 using    84 PHA bins.
 Reduced chi-squared =      321934.8     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     2.4467048E+07 using    84 PHA bins.
 Reduced chi-squared =      317753.9     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     2.4467048E+07 using    84 PHA bins.
 Reduced chi-squared =      313680.1     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1033.572     using    84 PHA bins.
 Reduced chi-squared =      13.08318     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   299.627     -3         0.      1.2014E-03   6.047      0.2667
              5.7302E-02  2.2340E-02
   107.930     -4         0.      2.2540E-03   5.989      0.2109
              5.2893E-02  1.3783E-02
   98.8879     -5         0.      1.2868E-03   5.988      0.2001
              5.4834E-02  1.2787E-02
   97.8265     -6         0.      1.9754E-03   5.987      0.1971
              5.4804E-02  1.2754E-02
   96.7863     -7         0.      1.4760E-03   5.988      0.1970
              5.4817E-02  1.2737E-02
   96.4096     -8         0.      1.8256E-03   5.988      0.1969
              5.4814E-02  1.2738E-02
   96.1668     -9         0.      1.5736E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
   96.0623    -10         0.      1.7516E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
   96.0025    -11         0.      1.6240E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
   95.9746    -12         0.      1.7145E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
 Number of trials exceeded - last iteration delta =   2.7924E-02
   95.9596    -13         0.      1.6498E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
   95.9522    -14         0.      1.6958E-03   5.988      0.1969
              5.4815E-02  1.2738E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 1.39E-07 | -0.99  0.00 -0.01 -0.04 -0.10
 1.13E-06 |  0.10 -0.06 -0.01 -0.15 -0.98
 3.14E-06 | -0.02 -0.06 -0.05  0.98 -0.15
 1.16E-04 |  0.01  0.79 -0.62  0.01 -0.04
 4.46E-04 |  0.00  0.61  0.79  0.07 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.6958E-03 +/-  0.4106E-03
    3    3    2   gaussian/b LineE    keV        5.988     +/-  0.1545E-01
    4    4    2   gaussian/b Sigma    keV       0.1969     +/-  0.1788E-01
    5    5    2   gaussian/b norm               5.4815E-02 +/-  0.2285E-02
    6    3    3   gaussian/b LineE    keV        6.592     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.2066     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.2738E-02 +/-  0.1620E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      95.95224     using    84 PHA bins.
 Reduced chi-squared =      1.214585     for     79 degrees of freedom
 Null hypothesis probability = 9.427E-02

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad47005030g220170.cal peaks at 5.988 +/- 0.01545 keV
-> Standard Output From STOOL group_event_files:

1 ad47005030g300170h.unf 284657
1 ad47005030g300270m.unf 284657
1 ad47005030g300370l.unf 284657
1 ad47005030g300470l.unf 284657

-> Fetching GIS3_CALSRC256.2
-> Extracting ad47005030g320170.cal from ad47005030g300170h.unf ad47005030g300270m.unf ad47005030g300370l.unf ad47005030g300470l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
      2 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14703     1024
      3 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
      2 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      713     1024
      3 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14703     1024
      4 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         219656      1036         218620         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49585       264          49321         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14703       969          13734         0         0         0
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            713        36            677         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        284657      2305         282352         0         0         0
   in  20994.     seconds
 Spectrum         has     2305 counts for 0.1098     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 20994.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47005030g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA > read events ad47005030g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > read events ad47005030g300470l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad47005030g320170.cal group=yes
Wrote spectrum to ad47005030g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad47005030g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad47005030g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:34:00 16-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad47005030g320170.cal;
 Net count rate (cts/s) for file   1  0.1098    +/-  2.2997E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     2.5975714E+07 using    84 PHA bins.
 Reduced chi-squared =      341785.7     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     2.5975714E+07 using    84 PHA bins.
 Reduced chi-squared =      337346.9     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     2.5975714E+07 using    84 PHA bins.
 Reduced chi-squared =      333022.0     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      953.8954     using    84 PHA bins.
 Reduced chi-squared =      12.07463     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   227.886     -3         0.      1.4713E-03   5.859      2.4366E-02
              6.7307E-02  1.2025E-02
   119.619     -4         0.      2.4748E-03   5.949      0.2009
              5.4224E-02  8.3173E-03
   66.0319     -5         0.      1.8612E-03   5.901      0.1406
              5.4819E-02  8.1486E-03
   64.5740     -6         0.      2.1495E-03   5.911      0.1427
              5.5846E-02  7.3772E-03
   64.4033     -7         0.      1.9712E-03   5.911      0.1420
              5.5906E-02  7.3562E-03
   64.3466     -8         0.      2.0887E-03   5.911      0.1419
              5.5905E-02  7.3587E-03
   64.3198     -9         0.      2.0107E-03   5.911      0.1419
              5.5904E-02  7.3589E-03
   64.3086    -10         0.      2.0621E-03   5.911      0.1419
              5.5904E-02  7.3590E-03
   64.3035    -11         0.      2.0280E-03   5.911      0.1419
              5.5904E-02  7.3589E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 1.29E-07 | -0.99  0.00 -0.01 -0.04 -0.11
 9.56E-07 |  0.12 -0.05 -0.01 -0.08 -0.99
 3.01E-06 | -0.03 -0.04 -0.05  1.00 -0.08
 8.39E-05 |  0.01  0.92 -0.40  0.01 -0.04
 2.76E-04 |  0.00  0.39  0.92  0.05 -0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               2.0280E-03 +/-  0.3873E-03
    3    3    2   gaussian/b LineE    keV        5.911     +/-  0.1065E-01
    4    4    2   gaussian/b Sigma    keV       0.1419     +/-  0.1565E-01
    5    5    2   gaussian/b norm               5.5904E-02 +/-  0.1939E-02
    6    3    3   gaussian/b LineE    keV        6.508     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1489     = par   4 *   1.049
    8    6    3   gaussian/b norm               7.3589E-03 +/-  0.1233E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      64.30354     using    84 PHA bins.
 Reduced chi-squared =     0.8139689     for     79 degrees of freedom
 Null hypothesis probability = 0.884

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad47005030g320170.cal peaks at 5.911 +/- 0.01065 keV

Extracting bright and dark Earth event files. (16:34:4)

-> Extracting bright and dark Earth events from ad47005030s000102h.unf
-> Extracting ad47005030s000102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.81E+04   215127 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         215127        14              0    215113         0         0
 Writing events file
     14 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        215127        14              0    215113         0         0
   in  16.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s000102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           14
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3           9
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :           14
 Number of image cts rejected (N, %) :            964.29
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0           14            0            0
 Image cts rejected:             0            9            0            0
 Image cts rej (%) :          0.00        64.29         0.00         0.00
 
    filtering data...
 
 Total counts      :             0           14            0            0
 Total cts rejected:             0            9            0            0
 Total cts rej (%) :          0.00        64.29         0.00         0.00
 
 Number of clean counts accepted  :            5
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s000202m.unf
-> Extracting ad47005030s000202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.45E+04    68038 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000202m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad47005030s000202m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030s000302l.unf
-> Extracting ad47005030s000302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  04:50:58    0.71E+04    10198 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          10198      2374              0      7824         0         0
 Writing events file
   2374 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10198      2374              0      7824         0         0
   in  2784.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s000302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         2374
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        2128
 Flickering pixels iter, pixels & cnts :   1           1           4
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            7
 Number of (internal) image counts   :         2374
 Number of image cts rejected (N, %) :         213289.81
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            7            0            0
 
 Image counts      :             0         2374            0            0
 Image cts rejected:             0         2132            0            0
 Image cts rej (%) :          0.00        89.81         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         2374            0            0
 Total cts rejected:             0         2132            0            0
 Total cts rej (%) :          0.00        89.81         0.00         0.00
 
 Number of clean counts accepted  :          242
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            7
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s000402l.unf
-> Extracting ad47005030s000402l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:25:54    0.30E+04     2713 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000402l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2713       328              0      2385         0         0
 Writing events file
    328 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2713       328              0      2385         0         0
   in  348.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s000402l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s000402l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          328
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               4         246
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :          328
 Number of image cts rejected (N, %) :          25276.83
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            6            0            0
 
 Image counts      :             0          328            0            0
 Image cts rejected:             0          252            0            0
 Image cts rej (%) :          0.00        76.83         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          328            0            0
 Total cts rejected:             0          252            0            0
 Total cts rej (%) :          0.00        76.83         0.00         0.00
 
 Number of clean counts accepted  :           76
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s000502h.unf
-> Extracting ad47005030s000502h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  07:00:48    0.12E+02     2554 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000502h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2554      2554              0         0         0         0
 Writing events file
   2554 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2554      2554              0         0         0         0
   in  12.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000502h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s000502h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s000502h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         2554
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :               0           0
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :         2554
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :           880            0          769          905
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :           880            0          769          905
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :         2554
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s000602l.unf
-> Extracting ad47005030s000602l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:47:36    0.14E+03     1044 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s000602l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1044      1044              0         0         0         0
 Writing events file
   1044 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1044      1044              0         0         0         0
   in  144.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s000602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s000602l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s000602l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1044
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
cleaning chip # 1
 Hot pixels & counts                   :               0           0
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          25          76
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          15          45
 
 Number of pixels rejected           :           40
 Number of (internal) image counts   :         1044
 Number of image cts rejected (N, %) :          12111.59
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0           25           15
 
 Image counts      :           256          276          256          256
 Image cts rejected:             0            0           76           45
 Image cts rej (%) :          0.00         0.00        29.69        17.58
 
    filtering data...
 
 Total counts      :           256          276          256          256
 Total cts rejected:             0            0           76           45
 Total cts rej (%) :          0.00         0.00        29.69        17.58
 
 Number of clean counts accepted  :          923
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           40
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s100102h.unf
-> Extracting ad47005030s100102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  06:06:46    0.81E+04   180368 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         180368        18              0    180350         0         0
 Writing events file
     18 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        180368        18              0    180350         0         0
   in  12.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s100102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           18
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :           18
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0           18
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0           18
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :           18
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s100202m.unf
-> Extracting ad47005030s100202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      MEDIUM      1999-05-06  04:40:18    0.45E+04    59931 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100202m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad47005030s100202m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030s100302l.unf
-> Extracting ad47005030s100302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  04:50:58    0.71E+04    14772 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14772      4240              0     10532         0         0
 Writing events file
   4240 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14772      4240              0     10532         0         0
   in  2784.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s100302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4240
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        4013
 Flickering pixels iter, pixels & cnts :   1           1           3
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :         4240
 Number of image cts rejected (N, %) :         401694.72
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            9
 
 Image counts      :             0            0            0         4240
 Image cts rejected:             0            0            0         4016
 Image cts rej (%) :          0.00         0.00         0.00        94.72
 
    filtering data...
 
 Total counts      :             0            0            0         4240
 Total cts rejected:             0            0            0         4016
 Total cts rej (%) :          0.00         0.00         0.00        94.72
 
 Number of clean counts accepted  :          224
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s100402l.unf
-> Extracting ad47005030s100402l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  06:25:54    0.30E+04     4590 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100402l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4590       615              0      3975         0         0
 Writing events file
    615 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4590       615              0      3975         0         0
   in  340.01     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s100402l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s100402l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          615
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               7         544
 Flickering pixels iter, pixels & cnts :   1           2          14
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :          615
 Number of image cts rejected (N, %) :          55890.73
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            9
 
 Image counts      :             0            0            0          615
 Image cts rejected:             0            0            0          558
 Image cts rej (%) :          0.00         0.00         0.00        90.73
 
    filtering data...
 
 Total counts      :             0            0            0          615
 Total cts rejected:             0            0            0          558
 Total cts rej (%) :          0.00         0.00         0.00        90.73
 
 Number of clean counts accepted  :           57
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s100502h.unf
-> Extracting ad47005030s100502h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      HIGH        1999-05-06  08:35:40    0.16E+02     1402 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100502h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1402      1402              0         0         0         0
 Writing events file
   1402 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1402      1402              0         0         0         0
   in  16.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100502h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s100502h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s100502h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1402
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
cleaning chip # 1
 Hot pixels & counts                   :               0           0
cleaning chip # 2
 Hot pixels & counts                   :               0           0
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :         1402
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :           351          416          633            2
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :           351          416          633            2
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :         1402
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030s100602l.unf
-> Extracting ad47005030s100602l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 CYGNUS X-3  BRIGHT      LOW         1999-05-06  08:22:44    0.15E+03     1094 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030s100602l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1094      1094              0         0         0         0
 Writing events file
   1094 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1094      1094              0         0         0         0
   in  152.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030s100602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad47005030s100602l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47005030s100602l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1094
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          10          32
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          10          35
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1           6          18
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1           6          20
 
 Number of pixels rejected           :           32
 Number of (internal) image counts   :         1094
 Number of image cts rejected (N, %) :          105 9.60
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            10           10            6            6
 
 Image counts      :           256          256          256          326
 Image cts rejected:            32           35           18           20
 Image cts rej (%) :         12.50        13.67         7.03         6.13
 
    filtering data...
 
 Total counts      :           256          256          256          326
 Total cts rejected:            32           35           18           20
 Total cts rej (%) :         12.50        13.67         7.03         6.13
 
 Number of clean counts accepted  :          989
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           32
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad47005030g200170h.unf
-> Extracting ad47005030g200170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         195847       601              0    195246         0         0
 Writing events file
    601 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        195847       601              0    195246         0         0
   in  1354.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad47005030g200170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   195847     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200170h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad47005030g200170h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030g200270m.unf
-> Extracting ad47005030g200270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad47005030g200270m.drk since it contains 0 events
-> Extracting ad47005030g200270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49939     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad47005030g200270m.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030g200370l.unf
-> Extracting ad47005030g200370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14826     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14826      1532              0     13294         0         0
 Writing events file
   1532 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14826      1532              0     13294         0         0
   in  3232.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad47005030g200370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14826     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14826     11365              0      3461         0         0
 Writing events file
  11365 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14826     11365              0      3461         0         0
   in  4384.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad47005030g200470l.unf
-> Extracting ad47005030g200470l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      688     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            688        32              0       656         0         0
 Writing events file
     32 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           688        32              0       656         0         0
   in  64.026     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad47005030g200470l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      688     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g200470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            688       240              0       448         0         0
 Writing events file
    240 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           688       240              0       448         0         0
   in  63.998     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad47005030g300170h.unf
-> Extracting ad47005030g300170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         219656       521              0    219135         0         0
 Writing events file
    521 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        219656       521              0    219135         0         0
   in  1358.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad47005030g300170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          HIGH        1999-05-06  06:06:58    0.94E+04   219656     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300170h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad47005030g300170h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030g300270m.unf
-> Extracting ad47005030g300270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad47005030g300270m.drk since it contains 0 events
-> Extracting ad47005030g300270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          MEDIUM      1999-05-06  04:40:30    0.31E+04    49585     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad47005030g300270m.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad47005030g300370l.unf
-> Extracting ad47005030g300370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14703     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14703      1411              0     13292         0         0
 Writing events file
   1411 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14703      1411              0     13292         0         0
   in  3232.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad47005030g300370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:53:18    0.82E+04    14703     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14703     11374              0      3329         0         0
 Writing events file
  11374 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14703     11374              0      3329         0         0
   in  4384.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad47005030g300470l.unf
-> Extracting ad47005030g300470l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      713     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            713        24              0       689         0         0
 Writing events file
     24 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           713        24              0       689         0         0
   in  64.026     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad47005030g300470l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 CYGNUS X-3  PH          LOW         1999-05-06  04:51:10    0.26E+03      713     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data14/seq_proc/ad0_47005030.004/ad47005030g300470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            713       267              0       446         0         0
 Writing events file
    267 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           713       267              0       446         0         0
   in  63.998     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data14/seq_proc/ad0_47005030.004/
Setting mkf directory to /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA > read events ad47005030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data14/seq_proc/ad0_47005030.004/
HK Directory is: /data/data14/seq_proc/ad0_47005030.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation (16:42:7)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (16:42:59)

-> Summing time and events for s0 event files
-> Standard Output From STOOL get_uniq_keys:

ad47005030s000102h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s000502h.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s000102h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad47005030s000502h.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad47005030s000102h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad47005030s000502h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order

-> listing ad47005030s000102h.unf
-> listing ad47005030s000502h.unf
-> listing ad47005030s000202m.unf
-> Standard Output From STOOL get_uniq_keys:

ad47005030s000302l.unf|S0_ARENA|1|S0 Area discrimination enable/disable
ad47005030s000402l.unf|S0_ARENA|0|S0 Area discrimination enable/disable
ad47005030s000602l.unf|S0_ARENA|0|S0 Area discrimination enable/disable
ad47005030s000302l.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s000402l.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s000602l.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s000302l.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad47005030s000402l.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad47005030s000602l.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad47005030s000302l.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad47005030s000402l.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad47005030s000602l.unf|S0CCDLST|0 1 2 3|S0 CCD readout order

-> listing ad47005030s000302l.unf
-> listing ad47005030s000402l.unf
-> listing ad47005030s000602l.unf
-> Summing time and events for s1 event files
-> Standard Output From STOOL get_uniq_keys:

ad47005030s100102h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s100502h.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s100102h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad47005030s100502h.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad47005030s100102h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad47005030s100502h.unf|S1CCDLST|2 3 0 1|S1 CCD readout order

-> listing ad47005030s100102h.unf
-> listing ad47005030s100502h.unf
-> listing ad47005030s100202m.unf
-> Standard Output From STOOL get_uniq_keys:

ad47005030s100302l.unf|S1_ARENA|1|S1 Area discrimination enable/disable
ad47005030s100402l.unf|S1_ARENA|0|S1 Area discrimination enable/disable
ad47005030s100602l.unf|S1_ARENA|0|S1 Area discrimination enable/disable
ad47005030s100302l.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s100402l.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s100602l.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad47005030s100302l.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad47005030s100402l.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad47005030s100602l.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad47005030s100302l.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad47005030s100402l.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad47005030s100602l.unf|S1CCDLST|2 3 0 1|S1 CCD readout order

-> listing ad47005030s100302l.unf
-> listing ad47005030s100402l.unf
-> listing ad47005030s100602l.unf
-> Summing time and events for g2 event files
-> listing ad47005030g200170h.unf
-> listing ad47005030g200270m.unf
-> Standard Output From STOOL get_uniq_keys:

ad47005030g200370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad47005030g200470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad47005030g200370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad47005030g200470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad47005030g200370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad47005030g200470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad47005030g200370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad47005030g200470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad47005030g200370l.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255)
ad47005030g200470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad47005030g200370l.unf|SP_B_F|226|Spread discri B for FLF method (0-255)
ad47005030g200470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad47005030g200370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad47005030g200470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad47005030g200370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad47005030g200470l.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)

-> listing ad47005030g200370l.unf
-> listing ad47005030g200470l.unf
-> Summing time and events for g3 event files
-> listing ad47005030g300170h.unf
-> listing ad47005030g300270m.unf
-> Standard Output From STOOL get_uniq_keys:

ad47005030g300370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad47005030g300470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad47005030g300370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad47005030g300470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad47005030g300370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad47005030g300470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad47005030g300370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad47005030g300470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad47005030g300370l.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad47005030g300470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad47005030g300370l.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad47005030g300470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad47005030g300370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad47005030g300470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad47005030g300370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad47005030g300470l.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)

-> listing ad47005030g300370l.unf
-> listing ad47005030g300470l.unf

Creating HTML header page (16:46:4)

Creating HTML source list (16:46:14)

Doing final wrapup of all files (16:47:3)

-> Copying job.par to ad47005030_004_job.par
-> Copying ad0.par to ad47005030_004_process.par
-> Creating ad47005030_tape.cat
-> Creating ad47005030_trend.cat
-> Creating ad47005030_004_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 15648
-> Updating FITS checksum keywords
-> Running fverify on all FITS files