#---------------------------------------------------------------------------
#  Section 1 : General Information
#---------------------------------------------------------------------------

{Experiment code}        : vs03d

{Your family name}       : Lister
{Your given name}        : Matthew

{The date you prepared this document 
(format is day-month-year, e.g 23-04-1999)} : 5-11-1999

{The name of the survey source that was observed} : J1635+38
{The name of the calibration source(s) observed} : 1823+568

{The year the experiment took place (e.g. 1998)} : 1998
{The starting day number of the experiment}      : 216

{List the GRTs that observed} : SC,MK,NL,BR
{List the tracking stations that took part} : RZ, TZ

{Which correlator was used to correlate the data? 
(Mitaka/Penticton/Socorro)} : Socorro

{AIPS Version used (e.g 15OCT98)} : 31DEC99
{Difmap Version used (e.g 2.3c)} : 2.3c
{Was vsop_difmap used? (yes/no)} : yes

{Abstract. 
Write a brief summary of the data reduction and its outcomes} : 
This was a full VLBA+Y dataset, originally in dual-polarization.
It was necessary to flag the RL,LR, and RR hands, which contained
no useful visibility data. 

Could not find good solutions to TZ for 23h25-23h38.

#---------------------------------------------------------------------------
#  Section 2 : Pre-AIPS Checklist
#---------------------------------------------------------------------------

{PI letter retrieved (yes/no)} : NO
{Data quality reports and plots retrieved? (yes/no)} : NO
{Pre-launch 5GHz survey data retrieved? (yes/no)} : NO
{Light-curve data retrieved? (yes/no)} : NO

# Input files for INDXR, ANTAB and UVFLG

{Has a INDXR input file (INDXR.TXT) been created? (yes/no)} : YES
{Has a ANTAB input file (ANTAB.TXT) been created? (yes/no)} : YES
{Has a UVFLG input file (UVFLG.TXT) been created? (yes/no)} : YES

{Any comments on Pre-AIPS file preparation?} : 


#---------------------------------------------------------------------------
#  Section 3 : AIPS Output File Checklist
#
# Names of expected output file names are contained in square brackets.
#---------------------------------------------------------------------------

{PRTAN [PRTAN.LIS] (yes/no)} : yes

{LISTR (optyp = 'SCAN') [LISTR.LIS] (yes/no)} : yes

{DTSUM (aparm = 0) [DTSUM_0.LIS] (yes/no)} : yes
{DTSUM (aparm = 1) [DTSUM_1.LIS] (yes/no)} : yes

{UVPLT (u vs v) [UVPLT_UV.PS] (yes/no)} : no
{UVPLT ((u,v) distance vs time) [UVPLT_UVD.PS] (yes/no)} : no
{UVPLT ((u,v) position angle vs time).  [UVPLT_UVPA.PS] (yes/no)} : no

{VPLOT antenna weights vs time (after adjustment) [WEIGHTS.PS] (yes/no)} : no

{ACCOR SNPLT (amplitude), 
   IF 1 [SN_ACCOR_1.PS] (yes/no)} : yes
  {IF 2 [SN_ACCOR_2.PS] (yes/no)} : yes

{APCAL SNPLT (amplitude), 
   IF 1 [SN_APCAL_1.PS] (yes/no)} : yes
  {IF 2 [SN_APCAL_2.PS] (yes/no)} : yes

# FRING SNPLT (delay, rate, SNR), as many as necessary to document the
# clear discovery of fringes at all antennas, numbered with "nn" for
# both IFs. Do NOT include the final SN table as it is plotted later.
#
#   Format is SN_FRINGnn_DEL_i.PS, SN_FRINGnn_RAT_i.PS,
# SN_FRINGnn_SNR_i.PS for delay, rate and SNR plots respectively,
# where "i" is the IF number (1 or 2).

{Number of times preliminary FRING solutions were plotted 
 (i.e maximum value of nn)} : 1

{Post-FRING CALIB SNPLT, 
   Phase:
   IF 1 [SN_CALIB_PHA_1] (yes/no)} : no
  {IF 2 [SN_CALIB_PHA_2] (yes/no)} : no
  {Delay:
   IF 1 [SN_CALIB_DEL_1] (yes/no)} : no
  {IF 2 [SN_CALIB_DEL_2] (yes/no)} : no
 
  {Rate:
   IF 1 [SN_CALIB_RAT_1] (yes/no)} : no
  {IF 2 [SN_CALIB_RAT_2] (yes/no)} : no
  {SNR:
   IF 1 [SN_CALIB_SNR_1] (yes/no)} : no
  {IF 2 [SN_CALIB_SNR_2] (yes/no)} : no

{Post-calibration VPLOT (amp and phase, with channel averaging)
   IF 1 [VPLOT_AP_1.PS] (yes/no)} : no
  {IF 2 [VPLOT_AP_1.PS] (yes/no)} : no


{Post-calibration POSSM (amplitude and phase, at least one 5 to 10 min
integration spectrum per tracking pass, indexed with nn = 01, 02, 03, ...),
   IF 1 [POSSMnn_AP_1.PS] (yes/no)} : yes
  {IF 2 [POSSMnn_AP_2.PS] (yes/no)} : no

{Output TASAV FITS file (containing all 'multisource' cal tables)
   [VSxxx_<surname>_TASAV.FITS] (yes/no)} : yes

{Calibrated and spectrally averaged FITS data files (one for each source),
   [<source_name>_<surname>_AIPS.FITS] (yes/no)} : yes

#---------------------------------------------------------------------------
#  Section 4 : Supplementary files
#
# Were any files created, other than those listed, to document the data
# reduction?  If so, please list them below using as many (File, Description)
# groups as required.
#---------------------------------------------------------------------------

#---------------------------------------------------------
{File}        : 
{Description} : 
#---------------------------------------------------------

#---------------------------------------------------------------------------
#  Section 5 : AIPS data-reduction notes
#
# The format is as follows:
#
# Task : the name of the task that is run or other operation performed
# ADVERBs : a list of the relevant non-default adverbs
# Input CL : the input calibration table used (if any) in running the task
# Input SN : the SN table that was used (if any)
# Output SN : the SN table produced (if any)
# Output CL : the CL table produced or modified (if any)
# Comments: any comments on the results of the operation
#
# Use as many of the (Task, ADVERBs, Comments, Input CL, Input SN,
# Output SN, Output CL) groups as required.
#---------------------------------------------------------------------------


#---------------------------------------------------------
{Task}      : FITLD
{ADVERBs}   : clint 0.5 ; wtthresh 0; digicor 1; delcorr 1
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : INDXR
{ADVERBs}   : cparm 0,0,0.5; infil 'INDXR.TXT'
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : MSORT
{ADVERBs}   : 
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------

#---------------------------------------------------------
{Task}      : UVFLG
{ADVERBs}   : stokes 'cros'; flagver 1
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : UVFLG
{ADVERBs}   : stokes 'RR'; flagver 1
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : UVFLG
{ADVERBs}   : infil 'uvflg.txt'; stokes ''
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : ACCOR
{ADVERBs}   : solint 5
{Input CL}  : 1
{Input SN}  : 
{Output SN} : 1
{Output CL} : 2
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : ANTAB
{ADVERBs}   : infil 'ANTAB.TXT'
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : SETJY
{ADVERBs}   : source '1633+382'; zerosp = 2.1
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : APCAL
{ADVERBs}   : 
{Input CL}  : 2
{Input SN}  : 
{Output SN} : 2 
{Output CL} : 3
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : CLCOR
{ADVERBs}   : opcode 'sbdl'; clcorprm = -160,-160; anten =10
{Input CL}  : 3
{Input SN}  : 
{Output SN} : 
{Output CL} : 3
{Comments}  : Applied -160ns delay to Y (10)
                      -500ns delay to TZ (11) and RZ (13)
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : FRING
{ADVERBs}   : REFANT 10; SEARCH 8,7,6,5,4,2,1,3,9,12; SOLINT 5;
              APARM 0,0,0,0,0,1,3,0,1,0;
              DPARM 3,300,200,0; DOCAL 1; GAINUSE 3
{Input CL}  : 3
{Input SN}  : 
{Output SN} : 3
{Output CL} : 
{Comments}  : Had to Fringe fit in segments since dataset too large
              to fit into memory.
#---------------------------------------------------------
#---------------------------------------------------------
{Task}      : SPLIT
{ADVERBs}   : aparm 2,0; gainuse 4
{Input CL}  : 
{Input SN}  : 
{Output SN} : 
{Output CL} : 
{Comments}  : 
#---------------------------------------------------------
#---------------------------------------------------------------------------
#  Section 6 : Antenna-based amplitude corrections
#---------------------------------------------------------------------------
{Antenna name list} :
{Amplitude correction factors} :
#---------------------------------------------------------------------------
#  Section 7 : Difmap data reduction notes
#---------------------------------------------------------------------------

{Phase Selfcal applied? (yes/no)} : yes
{Global Amplitude Selfcal applied? (yes/no)} : yes

{Amplitude Selfcal applied on non-global timescales? (yes/no)} : yes
{Modelfit made and saved using the vs_final_mod macro? (yes/no)} : yes
{Image made and saved using the vs_final_img macro? (yes/no)} : yes

{Comments on Difmap processing} :
Fit source with two gaussian components. 

# If GSCAL was used, report amplitude correction factors here. If GSCAL
# was used more than once, report the CUMULATIVE factor here (e.g if gscal
# reported a gain factor of 1.11 for HALCA the first time and 0.95 the 
# second time, the overall gain correction is 1.11 * 0.95 = 1.05.
# Separate antenna names and correction factors by commas or spaces. 
# e.g
#
# {Antenna name list} :            HALCA, HO,  HH,  MP,  KA
# {Amplitude correction factors} : 1.0,   1.6, 1.3, 1.0, 1.0
#
{Antenna name list} : BR NL SC TZ MK RZ
{Amplitude correction factors} : 1.00 1.02 0.98 0.99 1.02 0.99
{Antenna name list} : BR NL SC TZ MK RZ
{Amplitude correction factors} : 0.99 0.96 1.01 0.97 1.00 0.99


#---------------------------------------------------------------------------
# Do not delete or alter anything past this line
{VSOP Survey Checklist and Worksheet version} : 0.4
#---------------------------------------------------------------------------