From shibata@hotaka.mtk.nao.ac.jp Mon Jan 11 16:55:38 1999
To: vsog@vsop.isas.ac.jp
From: shibata@hotaka.mtk.nao.ac.jp (SHIBATA, Katsunori, M.)
Subject: VS03C 
Cc: bushi@hotaka.mtk.nao.ac.jp, kameno@hotaka.mtk.nao.ac.jp,
        umemoto@hotaka.mtk.nao.ac.jp, kameya@miz.nao.ac.jp,
        hkobaya@vsop.isas.ac.jp

========================================
MITAKA Correlation Summary  1999/01/04

Obscode:vs03c
Obsdate:1997/11/25

VS03c was treated as v97329 during correlation. 
We made the following Data quick look. 

1. Baselines vs. time plots and u-v plots were made for each correlation path. 

2. Delay residuals and rate residuals plots were made for all stations.
These were the results of fringe finding, so the station in which fringes
were not found showed large scattering. 

3. Amplitude and phase plots were made for baselines in which fringes were
detected. 

4. Autocorrelation bandpass plots were generated for all antennas for scan
on 'J2123+05'. 

5. Cross-correlation bandpass plots were made for baselines in which
fringes were detected for scan on 'J2123+05'. 

NOTES: 

RZ - Residual rate shows sinusoidal time-variation.

MP - Plenty of delay glitches are shown during 08:30 - 12:00.


NOTES for REDUCTION:
The unit of output amplitude is arbitrary. Use ACCOR just after loading to
the AIPS. 

Set DIGICOR = -1 and DELCORR = -1 in FITLD. 

Delete NX and CL tables just after FITLD, then re-build by INDXR. 

DO NOT use PHNEG!!  These FITS data are no longer necessary to use PHNEG. 

IF YOU HAVE ANY QUESTION AND PROBLEM ABOUT FITS DATA, please contact with 
shibata@hotaka.mtk.nao.ac.jp.