Parameter Detail: DS2-10
start date (GMT) | 2015-01-26 (26) |
---|---|
end date (GMT) | 2015-01-27 (27) |
team | |
disk diameter [mm] | 10 |
target liquid bridge length [mm] | 2.5, 5, 1 |
initial gap [mm] | 5.00 |
cooling disk position at the end of experiment [mm] | 0 |
aspect ratio (L/D) | 0.25, 0.5, 0.1 |
typical volume ratio (V/V0) | 1, 0.8, 0.9-0.93 |
MIDM image position from HD surface (Edge) [mm] | |
recording status | without VRU Rec. -> with VRU Rec. |
operation target | influence of cooling disk temp. on critical DT -> critical DT -> correction value of TC |
note | -> This run is for getting the correction value of TC4 ,TC5 and TC6 on Cooling Disk, and TC1, TC2 and TC3 on Heating Disk.; You can use the data between 06:55-10:30 to correct TC values. |